custom cross members..show em if you've got em
03-05-2012, 10:22 AM
#1
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Redford MI
Posts: 836
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
custom cross members..show em if you've got em
Looking for some visual examples of custom cross members. Currently looking for a set of full widths and plan on a custom three link set up. But was hopping to get some ideas on LCG cross members and Stock location ones too. My goal is to stay in the 4.5- 5.5 height and eventually 36-37" tires. I know I could search other forums but prefer to see what we have on this one. Thanks Aaron....
Last edited by grn99; 03-05-2012 at 10:26 AM.
03-06-2012, 09:44 AM
#2
Senior Member
Thread Starter
Join Date: Jan 2009
Location: Redford MI
Posts: 836
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
No one??? Thought I posted to fabrication. May have mistakenly posted here.
Last edited by grn99; 03-06-2012 at 09:47 AM.
03-12-2012, 10:42 AM
#5
i made this one a while back
sat perfectly flush with the frame, had to clock the case to run it and it lifted the t-case maybe 1/2" to an inch.
and yes the t-case was re-sealed before everything was installed.
right now i just run a modified tnt belly pan
sat perfectly flush with the frame, had to clock the case to run it and it lifted the t-case maybe 1/2" to an inch.
and yes the t-case was re-sealed before everything was installed.
right now i just run a modified tnt belly pan
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)