Coil pack to distributor conversion
08-13-2018, 04:54 PM
#16
Senior Member
I have the dodge viper coil setup on 2 of my jeep Cherokees(both 01 models). You need a coil(56032520AB or 56032520AC will do). You need a wiring adapter (Airtex 1P2041). You need to cut and flip the wiring connector. I would add about 18 to 24" of wire to this harness to give yourself plenty of room. This depends on where you mount the coil. I made an adapter and mounted the coil to the radiator overflow tank. Then you need a set of wires. A set for a 98 should work. if you can get on NAXJA, there is a good writeup on this. I have had no problems with either jeep since doing this.
The following users liked this post:
augustdirt (05-18-2022)
04-23-2022, 01:49 AM
#17
Has any one successfully done this.
This might be a dead thread but I need a little help I converted a 2000 engine to distributor have done all wiring changes and have a 1998 computer running it. Starts up fine idles down then idles down 1 more time and has a rough idle and the headers start glowing orange. Any help is appreciated
I've searched and found little info/detail. What exactly is needed to convert from coil pack to distributor, I'm looking for specifics, like what sensors and harnesses are needed to do this swap? Please don't tell me it's not worth it or ask why I want to..just looking for answers not criticism. Thanks in advance for any answers
