clutch problems
CF Veteran
Joined: Jun 2010
Posts: 2,501
Likes: 4
From: Flint/Asheville
Year: 1995
Model: Cherokee
Engine: 4.0 HO
There is no adjustment or way to bleed the clutch like normal cars do, stupid chrysler. Here is how I've bleed my 95:
1) get a helper to watch fluid level and for bubbles
2) take the slave off the system and try to fill it as best as you can, the more full the better (and easier in later steps)
3) fill the reservoir
4) with the slave off, pump the clutch pedal once and fluid will start coming out the bottom.
5) when its a steady stream, reconnect the slave quickly
6) point the slave straight down and pump it in/out until no more bubbles come out in the reservoir
To adjust the engagement zone of the clutch I made a new push rod for the slave that was alittle bit longer
1) get a helper to watch fluid level and for bubbles
2) take the slave off the system and try to fill it as best as you can, the more full the better (and easier in later steps)
3) fill the reservoir
4) with the slave off, pump the clutch pedal once and fluid will start coming out the bottom.
5) when its a steady stream, reconnect the slave quickly
6) point the slave straight down and pump it in/out until no more bubbles come out in the reservoir
To adjust the engagement zone of the clutch I made a new push rod for the slave that was alittle bit longer
Thread
Thread Starter
Forum
Replies
Last Post
jmarzo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
Oct 18, 2022 04:11 PM
Psiegrist1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
34
Mar 17, 2022 02:15 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Sep 3, 2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



