bad wobble
Thread Starter
Newbie
Joined: Sep 2010
Posts: 26
Likes: 0
From: Royston, Ga.
Year: 1990
Model: Cherokee
Engine: 4.0
Ok I have a 90 xj with 4.5 lift. just recently everytime I hit a bump at speeds over 25 mph, I get a terrible wobble coming from the right side of the jeep. It feels like the tire is about to come off, I will pull over and stop then take off again and everything is fine. I do not feel it in the steering whell. It does it maybe once or twice a week. I have jacked it up and looked for anything loose and cannot find anything. Any ideas?
Thanks
Thanks
Old School CF Moderator
Joined: May 2010
Posts: 9,652
Likes: 3
From: Chattanooga
Year: 2001
Model: Cherokee
Engine: 4.0
Maybe its out of balance..or the tire is bad.
Go ahead and check the normal Death wobble culprits..better safe than sorry:
Tie rod ends, ball joints, tire balance, control arm bushings, allignment.
Go ahead and check the normal Death wobble culprits..better safe than sorry:
Tie rod ends, ball joints, tire balance, control arm bushings, allignment.
CF Veteran
Joined: Jun 2009
Posts: 2,173
Likes: 0
From: Columbus, Ohio
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
xj88 is on point. balance, alignement, or worn parts. may not be possible to get the correct caster angle with your current control arms either.
Senior Member
Joined: Aug 2010
Posts: 827
Likes: 1
From: Midland Park, NJ
Year: 1999
Model: Cherokee
Engine: 4.0L
Dont forget to check your hubs and lugs as well easily over looked . . Also have someone sit in the jeep and turn the steering wheel back and forth and look for any loose or worn parts
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
MrPerez
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 17, 2015 03:03 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
Sep 7, 2015 06:47 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



