Ashtray swith panel...
#31
Member
Thread Starter
Join Date: Aug 2011
Location: Creswell, Oregon
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Good news is I don't smoke....My spit cup on the other hand will never get moved.
As for BOTDC?? Care to enlighten?
thanks and any more input it always welcome!!!
Sigsandjeeps
As for BOTDC?? Care to enlighten?
thanks and any more input it always welcome!!!
Sigsandjeeps
#33
Member
Thread Starter
Join Date: Aug 2011
Location: Creswell, Oregon
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Fantastic...unfortunately, I can't take credit.
Jeepjunky was a huge help and all I did was take his diagram and adapt it to what I wanted.
I'm super thrilled with how the switch panel turned out and I was thinking about making a couple extra.
it will fit 97+
any interest?
I have a bunch of product left over.
As soon as I get all wired up, I'll take pictures through the process and post a build so everyone can see what the hell I did and so I can go back over and check and find my mistakes.
Thanks again everyone.
Sigsandjeeps
Jeepjunky was a huge help and all I did was take his diagram and adapt it to what I wanted.
I'm super thrilled with how the switch panel turned out and I was thinking about making a couple extra.
it will fit 97+
any interest?
I have a bunch of product left over.
As soon as I get all wired up, I'll take pictures through the process and post a build so everyone can see what the hell I did and so I can go back over and check and find my mistakes.
Thanks again everyone.
Sigsandjeeps
#34
Member
Thread Starter
Join Date: Aug 2011
Location: Creswell, Oregon
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
Alright guys, I have everything I need, minus all my lights, but I was curious if you guys have any ideas where in the hell I can get relays for Cheap?
I'm not interested in spending 7$ a pop.
There is no junk yard around here and I don't have a donor rig to pull anything out of!
Any ideas?
Sigsandjeeps
I'm not interested in spending 7$ a pop.
There is no junk yard around here and I don't have a donor rig to pull anything out of!
Any ideas?
Sigsandjeeps
#36
Member
Thread Starter
Join Date: Aug 2011
Location: Creswell, Oregon
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
I'm sure that would go swimmingly....I'll find something.
I can't thank you enough. And just so we're on the same page, I run one of the little wires from inside the CAT5 cable from the supply from each switch to the pin on each relay correct?
Again, thank you so much for everything!!!
I can't thank you enough. And just so we're on the same page, I run one of the little wires from inside the CAT5 cable from the supply from each switch to the pin on each relay correct?
Again, thank you so much for everything!!!
#38
Member
Thread Starter
Join Date: Aug 2011
Location: Creswell, Oregon
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0
So, Looking back at that schematic,Do I need to run the power wire from the switches to the relay as well? I think I just noted the CAT5 running to the relay?
Thanks and sorry for takin up so much of your time!
Sigsandjeeps
Thanks and sorry for takin up so much of your time!
Sigsandjeeps
Thread
Thread Starter
Forum
Replies
Last Post
87lowcog35s
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
04-30-2023 02:17 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)