Anyone have any luck with running these anti-wrap leaf spring mounts??

http://www.barnes4wd.com/Anti-Wrap-L...d-9_p_133.html

as opposed to figuring and fabbing an anti-wrap bar, just cutting out my leaf spring perches and welding these in would be much easier.

 

why not run an overload leaf?

 

I'm running the ruffstuff ones on my 8.8. they're a 1/4" longer and you should support ruffstuff! lol. they work fine I suppose it would depend on how clapped out your leaf packs are

 

in theory they work. But If you use crappy leaf packs they will still wrap like a ****. They are no replacement for a traction bar but they help.

And I'd support ruffstuff as they are a vendor, look around for a coupon code too, they are always out there. I know its kinda hard to screw up a leaf perch, But I have received parts that don't fit from barnes, a diff cover with a leaking weld, and a wrong bolt kit. All from one order. Many of barnes parts seem to be a ripoff of ruffstuff as well.

 

http://www.seriousoffroadproducts.co...x-Spring-Perch

 

thanks for all the help guys, i've decided to just re-pack the springs, i have a pair of S10 blazer springs to rob a bottom leaf out of and after a mistake on my order for leaf springs clamps i now have 12 clamps instead of the 6 i actually need. If the S10 leaf and new clamps don't fix it then its gonna be a new set of leafs.