ALICE/MOLLE Storage project
CF Veteran
Joined: Dec 2011
Posts: 1,467
Likes: 0
From: Wilmington, nc
Year: 1998
Model: Cherokee
Engine: Inline 6
The fabric I ordered was 60" wide by two yards long, only cost about 17 bucks shipped. Plus comes in just about any color and camo out there. I figured after I see everything up shouldn't cost more than 100 bucks to do all the seats.
CF Veteran
Joined: Aug 2012
Posts: 1,281
Likes: 2
From: Bentonville, AR
Year: 1990
Model: Cherokee
Engine: I6 4.0
I looked up the fabric on ebay, it seems to be a good price for quality material. My comment on cost was someone's link to a MOLLE seat cover.
CF Veteran
Joined: May 2008
Posts: 3,018
Likes: 23
Year: 1988
Model: Cherokee
Engine: AMC242
If they're still around (I haven't checked lately,) you can also get MIL-spec material from www.diytactical.com - including specs for how it's all put together, and tips on how to design and make stuff (the forum was around before the online store.)
I probably have a few other sources for parts and materials, I can look if asked nicely...
I probably have a few other sources for parts and materials, I can look if asked nicely...
CF Veteran
Joined: Feb 2012
Posts: 1,258
Likes: 0
From: Hamburg, NY
Year: 2001
Model: Cherokee
CF Veteran
Joined: May 2008
Posts: 3,018
Likes: 23
Year: 1988
Model: Cherokee
Engine: AMC242
CF Veteran
Joined: Feb 2012
Posts: 1,258
Likes: 0
From: Hamburg, NY
Year: 2001
Model: Cherokee
Seasoned Member
Joined: Jul 2012
Posts: 492
Likes: 1
From: Ohio
Year: 1998
Model: Cherokee
Engine: 4.0L I6
Amazon or ebay, can't remember.
CF Veteran
Joined: Aug 2012
Posts: 1,281
Likes: 2
From: Bentonville, AR
Year: 1990
Model: Cherokee
Engine: I6 4.0
I like the multicam fabric. Do you have a link for that fabric? I definitely want MOLLE seat covers but don't wanna pay for Smittybilt ones.
Here is my visors installed and loaded up with pen, glow-stick, knife, surefire, and seat-belt cutter on the webbing side. Name-tape, notepad, and ID card on the other side.
Here is my visors installed and loaded up with pen, glow-stick, knife, surefire, and seat-belt cutter on the webbing side. Name-tape, notepad, and ID card on the other side.
Thread Starter
Member
Joined: Jul 2012
Posts: 111
Likes: 0
From: MS
Year: 1989
Model: Cherokee
Engine: 4.0w/703 injectors
I also came up with a way to mount my shotgun. I ripped out my old headliner because it was falling off anyways and it smelled like cigarettes. So I took a heated butter knife and made to slots in the adhesive that glues the rear crossbar to the roof. I ran two lashing straps (available at any camping store) through the slots, and lashed my Mossy to the straps. I left about a quarter inch between the shotgun and the crossbar so it wouldnt rub. I have driven about 300 miles with it and no problems.
Seasoned Member
Joined: Sep 2012
Posts: 304
Likes: 0
From: thompson,okanogan,shushwap area in central British columbian
Year: 91 laredo
Model: Cherokee
Engine: HO 4l
Senior Member
Joined: Mar 2013
Posts: 639
Likes: 3
From: lake stevens, wa
Year: 1996
Model: Cherokee
Engine: 4.0L
contributing my idea for the molle fans..
just 1/8" flat steel from home depot, some nylon spacers, and some nuts and bolts.. drilled thru the bars, then spaced them out on the cover and drilled those out too. assembled them with a 3/8" nylon spacer between the bar and cover, nuts and fender washers on the backside. then i predrilled and ran a few extra screws thru the cover into the hatch to support the extra weight. took maybe an hour or so to put together, and cost me maybe $40 said and done?
just 1/8" flat steel from home depot, some nylon spacers, and some nuts and bolts.. drilled thru the bars, then spaced them out on the cover and drilled those out too. assembled them with a 3/8" nylon spacer between the bar and cover, nuts and fender washers on the backside. then i predrilled and ran a few extra screws thru the cover into the hatch to support the extra weight. took maybe an hour or so to put together, and cost me maybe $40 said and done?
