Picked these up off craigslist. Not sure what brand they are. I know the bend goes down but which end goes on the frame side and what end goes on the axle side? I dont feel like the jam nut should be that close to the axle also this way the zerk for the frame side is not accesible. Additionaly these arms have one "flex joint" end and one normal end. I have the flex joint end on the frame side right now. Wanna make sure they are goibg in correctly before i snug it all down. Thanks

 

They need to go the other way. Does the side you have in the frame side have an offset bushing? Meaning the tube goes into the bushing below the centerline?

 

Spin them 180*

 

Yup i flipped em around thanks!