About to start ibstslling my rc 6.5 la on my 95 xj manual
#1
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
About to start ibstslling my rc 6.5 la on my 95 xj manual
Anything I should look out for? I remember reading that I'll need to install the tranny cross member different since i have a manual so the arms reach the right way. This correct?
#3
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
Originally Posted by freegdr
did you try looking herehttp://www.roughcountry.com/install_instructions.html
#6
Senior Member
Join Date: Jun 2010
Location: ............
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Originally Posted by Sasq40
Anything I should look out for? I remember reading that I'll need to install the tranny cross member different since i have a manual so the arms reach the right way. This correct?
#7
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
Originally Posted by JCKustoms
You'll need some "good" quality cut-off wheels to remove your LCA upper mounts! Unless you use a sawzall. And spray all bolts/nuts and brake line fittings, etc with some PB Blaster!!!
Trending Topics
#8
CF Veteran
Join Date: Mar 2010
Location: Broward County Fl.
Posts: 47,923
Likes: 0
Received 22 Likes
on
22 Posts
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
think it would be a good idea to disconnet battery when using the plsma cutter as not to back feed and burn short anything out
#12
Member
Thread Starter
Join Date: Jun 2010
Location: Northern Alberta
Posts: 189
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0l
Originally Posted by freegdr