98 grand motor into a 98 cherokee??
05-06-2011, 10:43 PM
#1
Newbie
Thread Starter
Join Date: Apr 2011
Location: Alabama
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
98 grand motor into a 98 cherokee??
Motor not fitting correctly.....Is it motor mounts and can the cherokee mounts be put on the grand motor??? Or do I just need to keep wiggling?
4x4 , 4.0 L6 1998
4x4 , 4.0 L6 1998
05-06-2011, 10:47 PM
#3
Newbie
Thread Starter
Join Date: Apr 2011
Location: Alabama
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
pulled motor and transmission out together....swapped motors, success.... and now I have the whole unit back in but the motor mounts dont seem to line up right.
05-06-2011, 10:52 PM
#5
Newbie
Thread Starter
Join Date: Apr 2011
Location: Alabama
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
That is my question....will the XJ mounts fit in/on the correct spot on the GC motor? I didnt know if anyone has come across this issue.
After swapping the flywheel everything else seems to be the same.
After swapping the flywheel everything else seems to be the same.
05-06-2011, 10:55 PM
#7
CF Veteran
Join Date: Sep 2010
Location: Salt Lake City, UT
Posts: 4,968
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L
I think they will. the engines for the grand Cherokee and Cherokee seam to over lap from 92-98. haven't done this myself but it should work as they share the same part numbers.
http://www.quadratec.com/products/51107_0003.htm
http://www.quadratec.com/products/51107_0003.htm
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ydduba
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
08-26-2015 04:26 AM
EBowen95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
49
08-25-2015 08:44 PM
Katt Dogg
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
08-25-2015 08:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)