Hey guys... I'm having a tough time deciding what i want. My options are 6 inch long arm, or an 8 inch. I know 6 is stable and secure. Heard 8 is too big, but i want to be able to clear 37's by the time i'm done with this one. Any suggestions? greatly appreciated..

 

Pretty sure you'll need the 8 inch to clear 37s...

 

6.5 inch long arm kit will clear 37s with trimming down the road.

 

yes trimming is on the menu. but is 8 going to give me too high of a CG?

 

8's gonna be to high IMO. I'm assuming your going with tons for the 37s so 6in will be fine with the wider axles and 37s

 

i personally like a little bigger jeep, but you can fit 37's with full widths and a 6.5 with lots of trimming and proper bumpstops.

 

if you'll be wheeling it and goin on trails dont go 8 inch. 6-6.5 will easily fit 37's you just gotta trim a lil. if you really want to try eight get a 6 inch kit and add a 2" coil spacer and longer shackles, if you dont like it you can easily go back down.

 

Going to tons will give you a slight lift as the axle tubes are bigger. Go 6".

 

6 for sure. will look alot better and perform better

 

Lower is better, flex is over rated. I've been running ~6" lift on 37's for a couple of years and it really is nice in sidehill situations. 8" lifts look goofy IMHO.

 

yes i think this has made up my mind to go with a 6 over 8. thanks for the help!

 

I wouldnt go over 6"

I'll bring up the famous ktmracer rig with 3" lift on 37's

 

6,
heck ill be cramming 37s under my 4.5 inch lift in a few months im sure you could do it on 6. 8 is too high, my dad had an xj on an 8 inch lift it felt wayy too high

 

i always tell them 8. then suprise the with 6.25 most of the time 6.5 on a good day

 

Lmao.