Jeep Cherokee Forum

Jeep Cherokee Forum (https://www.cherokeeforum.com/)
-   Modified XJ Cherokee Tech (https://www.cherokeeforum.com/f67/)
-   -   6.0 ls swap (https://www.cherokeeforum.com/f67/6-0-ls-swap-216006/)

davexj111 11-07-2015 07:09 AM

6.0 ls swap
 
thinking in swaping my 2000 xj 4.0 to a ls 6.0 haves anyone done it b4 and was tranny do they us and t-case ????????? was thinking about the supercharge for the 4.0 but for the price i think its alot

jbsjunk 11-07-2015 07:48 AM

This belongs in "Modified Tech" since the 6.0 is not stock. Popular swap. I already have a small block in mine.

SeriousOffroad 11-07-2015 07:54 AM

I put a 5.3L in my last heep, new project is getting a 6.0L, 4l65e and a Dana 300.

davexj111 11-07-2015 08:19 AM

6.0 ls swap
 
thinking in swaping my 2000 xj 4.0 to a ls 6.0 haves anyone done it b4 and was tranny do they us and t-case ????????? was thinking about the supercharge for the 4.0 but for the price i think its alot

SeriousOffroad 11-07-2015 09:28 AM

A little light reading.....
http://www.naxja.org/forum/showthread.php?t=1007477

Fred/N0AZZ 11-07-2015 11:19 AM

Done right an excellent swap, but in no way cheap lots involved!

madmanmarty 11-07-2015 06:03 PM

How would the unibody frame hold up?

jbsjunk 11-07-2015 06:07 PM


Originally Posted by madmanmarty (Post 3167768)
How would the unibody frame hold up?

Just fine. This is lighter than the stock 4.0 and they plate the frame on those.

SeriousOffroad 11-07-2015 08:29 PM

Plating, 1/8" minimum but 3/16 if I was going that route again.

bryweb 11-07-2015 08:30 PM

Another Good Writeup http://www.jeepforum.com/forum/f369/...-swap-1999961/

cleenrob 11-07-2015 09:33 PM

go ls series. im doing a 5.3 soon(maybe a 6.0 if i can find a good deal) i did a lot of looking into building up the 4.0 but the ls engines have so much more to offer in stock form alone, and only up to go from there. if figuring roughly 5 grand for my swap, im sure ill end up getting nickle and dimed to death and go over my budget a bit but i expect it at least.

tons of good info here:
http://www.lt1swap.com/wiringharness.htm

XJwonders 11-07-2015 09:46 PM


Originally Posted by SeriousOffroad (Post 3167535)
I put a 5.3L in my last heep, new project is getting a 6.0L, 4l65e and a Dana 300.

what axles? Passenger drop I assume if you aren't flipping the 300?

SeriousOffroad 11-07-2015 10:50 PM

Got a Ford HP D60 for the front and a 14bolt for the rear.

Photojared 11-08-2015 02:25 AM

Yea I'm currently doing the 5.3 swap. Wouldn't recommend unless you have disposable income. It's not cheap and the little **** will kill you...

Atmos 11-09-2015 02:30 PM

I'll be running a hopped up th400 since it's offroad only (no 4th gear). are you planning to street drive the rig? that kind of info would be helpful. it's an atlas for me I wasn't a fan of any of the other tcase options in driver drop application. But I'm already looking at $3500 before I even get my hands on an engine. for a street driver / weekend warrior I'd be looking at a stroked 4.0


All times are GMT -5. The time now is 06:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands