i was wondering the lowest suspension lift that can be put on a 2000 cherokee sport and fit 32's. i was told there were 2 and 3 inch lifts but they were body lifts which i do not want to do. I think 4 inch is the shortest suspension but im not sure.

 

kinda hard to body lift a unibody there guy

 

There is no such thing as a body lift for a Jeep Cherokee because its a Unibody truck. If you wanna wheel it and willing to trim I ran 3.5" lift with a 33" a/t tire that measured 32" and loved it. Personally If i wanted to run 32s i would do either 3.5"-4.5" lift. You can run less lift but you will need to trim your fenders.

-Mike

 

x2 on unibody.
i have 33's on a 3'' lift.

 

I've got a 3'' Rough country lift, Series II.

Fit 33's, Tucked the rear Fenders,
and chopped the front (I'm sure you'll do a better cutting job then me..
Don't drink & cut)

 

 

you can fit 32's at stock height if u really wanted. it just depends on the purpose but i would go atleast 3 in

 

32's stock would be retarded! hahahah. but you could!!
have fun cutting (:

 

I have 32's on my 3 with a trim, didnt have to trim tho.

 

someone on the forum stuffed 37's at 1.5" and it was a hack job lol. im goin 3in and 32's with minimal trimming

 

thats what i should've done. i have to much cutting, ruined the fenders of the jeep

 

if i were to put bigger wheels on my jeep for trails nd mudding I would defiantly lift it more than 2" and risk having to cut most of the fenders off

 

more fender cutting, less rolling over. seems like a fair trade to me