Modified XJ Cherokee Tech XJ (84-01)
All modified tech questions. If it modifies your XJ beyond stock parts ask it here.
Sponsored by:
Sponsored by:

1" is all i want

Thread Tools
 
Search this Thread
 
Old Jun 24, 2012 | 09:19 AM
  #1  
JHumes's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 65
Likes: 0
From: Moorcroft, WY
Year: 1989
Model: Cherokee
Engine: 4.0
Default 1" is all i want

My question is I want to gain one more inch of lift. I have 4" Tomken ultra flex kit under my 1989 XJ. I am looking at Rubicon Boomerang shackles that they say gains one inch. http://www.quadratec.com/products/16311_5600.htm.Then coil spring isolaters for the front. I have Nitro 2.0 shocks on this jeep sizes for 4" to 6" lift so I'm not worried about that. I am also going to order new brake lines. I just would like to hear your guys thoughts on this.
Thanks
Reply
Old Jun 24, 2012 | 09:28 AM
  #2  
ragged1's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 982
Likes: 0
From: seacoast, new hampshire
Year: 2000
Model: Cherokee
Engine: 4.0
Default

I'm curious as to why only one inch. There is a good bit of labor involved for minimal gain. You have to take the whole front apart to put in the isolators.
Reply
Old Jun 24, 2012 | 09:36 AM
  #3  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

You could be done with it by the time you finished typing this cute little thread.

Go lift your Jeep and be done with it.

and please don't take the entire front end apart to install a coil isolator. Just pull the spring out and be done.

Hurry, you're running out of day light.
Reply
Old Jun 24, 2012 | 09:37 AM
  #4  
lukeandjakejeep's Avatar
Junior Member
 
Joined: Jul 2011
Posts: 87
Likes: 0
Model: Cherokee
Default

he wants one inch for the look I'm guessing, probably something that fits with his wanted tire combo, or hes got a buddy one upping him. if you've got stock steering still you might wanna look at that, otherwise everything sounds good.
Reply
Old Jun 24, 2012 | 09:38 AM
  #5  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

He's compensating.
Reply
Old Jun 24, 2012 | 09:43 AM
  #6  
caged's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

it depends whether your tomken lift included shackles for that lift height.
the rubicon express shackles only gains one inch lift over stock shackles.

as for the front, just pull your coils, slide isolators up the bumpstop and reinstall coils.

you may or may not need a one inch trans drop.
Reply
Old Jun 24, 2012 | 09:47 AM
  #7  
JHumes's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 65
Likes: 0
From: Moorcroft, WY
Year: 1989
Model: Cherokee
Engine: 4.0
Default

I'm hung like a buck gerbil by the way. Lol.
I went from a 31" tire to a 32" and I have a tire rub issue. I played around with it and 1 inch fixes the rub.
Reply
Old Jun 24, 2012 | 09:49 AM
  #8  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

lol!

What bump stops are you running?

It's usually much more practical to trim a little or bumperstop more instead of lifting the Jeep higher.

I run 31's on 3 inches of lift and it doesn't rub at all. You should easily run 32s on 4"
Reply
Old Jun 24, 2012 | 09:51 AM
  #9  
JHumes's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 65
Likes: 0
From: Moorcroft, WY
Year: 1989
Model: Cherokee
Engine: 4.0
Default

I have the 1 inch trans drop. Track bar is relocated already and just waiting on my ZJ tie rods to show up.
Reply
Old Jun 24, 2012 | 09:54 AM
  #10  
JHumes's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2011
Posts: 65
Likes: 0
From: Moorcroft, WY
Year: 1989
Model: Cherokee
Engine: 4.0
Default

I have to play dumb (duh) on the bump stops but they are on the jeep.
Reply
Old Jun 24, 2012 | 10:00 AM
  #11  
Lowrange2's Avatar
Junior Member
 
Joined: May 2008
Posts: 15,016
Likes: 11
From: +34° 25' 35.67", -81° 21' 12.04"
Year: 1993
Engine: 4.0
Default

I don't get it... Play dumb?

You need to make them longer...
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:06 PM.