4 Attachment(s)
Ok so very soon I will be pulling out my dana 30 front axle to swap in a dana 44. The specs on the dana 30: 4.88's, lock right locker, 760 u joint shafts, new ball joints, new upper bushings, fairly new timken unit bearings, new calipers, trussed, boxed/skids on the lower control arm mounts, boxed in upper passenger mount. It has full crossover Heim steering, and over the axle track bar mount. The knuckles have been braced to make the passenger side Heim mount "triple" shear, and the drivers side double shear. The steering will be sold with the axle if the price is right. But I will throw in the stock steering knuckles and drag link and beefed tie rod for a slightly lower price. It does have sway bar links still but have been raised to clearance the crossover steering. The gears were set up professionally in a true offroad shop.
I'm looking for 950.00 but will accept reasonable offers and a lower price without the steering. Attachment 201830 Attachment 201831 Attachment 201832 This pic is before the over axle track bar mount was added. Attachment 201833 |
Still have your old 3.55 gears from it? If so wanna sell them?
|
Originally Posted by NWhunter
(Post 2535174)
Still have your old 3.55 gears from it? If so wanna sell them?
|
Looking for 650 for the dana 30 with stock steering that has beefer tie rod, and will throw in extra 3.55 gears for a dana 30, extra shafts. Also will include a 8.25 with 2 sets of 3.55's, an extra carrier, and extra shafts.
|
$500?
|
Originally Posted by Cherokeefever
(Post 2577533)
$500?
|
What do ya want for a pair of 8.25 shafts an carrier/gears??
|
Originally Posted by wanagojeep
(Post 2591405)
What do ya want for a pair of 8.25 shafts an carrier/gears??
|
Do you still have the one ton steering? I'll buy it if you do.
|
2 Attachment(s)
Originally Posted by gilbertxj466
(Post 2592019)
Do you still have the one ton steering? I'll buy it if you do.
Do have a black hood with pealing clear coat but no dents! A straight passenger side fender baby blue. 91 A black hatch from a 93 A baby blue header panel. 91 Black soft 8 rims. 5x4.5 3.75 back spacing, 8" width. Attachment 210045 Attachment 210046 Still have a complete 8.25 27 spline with bad gears but have a set of 3.55's and spear carrier to go with it. Spare shafts. Home made tube doors that will drop right in on a pre 97 xj. Drivers has a mirror. |
How much for wheels and tube doors?
|
Originally Posted by tiegs89xj
(Post 2605985)
How much for wheels and tube doors?
|
All times are GMT -5. The time now is 10:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands