Mark this thread as Unsold
Built dana 30.
07-09-2013, 04:35 PM
#1
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Ok so very soon I will be pulling out my dana 30 front axle to swap in a dana 44. The specs on the dana 30: 4.88's, lock right locker, 760 u joint shafts, new ball joints, new upper bushings, fairly new timken unit bearings, new calipers, trussed, boxed/skids on the lower control arm mounts, boxed in upper passenger mount. It has full crossover Heim steering, and over the axle track bar mount. The knuckles have been braced to make the passenger side Heim mount "triple" shear, and the drivers side double shear. The steering will be sold with the axle if the price is right. But I will throw in the stock steering knuckles and drag link and beefed tie rod for a slightly lower price. It does have sway bar links still but have been raised to clearance the crossover steering. The gears were set up professionally in a true offroad shop.
I'm looking for 950.00 but will accept reasonable offers and a lower price without the steering.
This pic is before the over axle track bar mount was added.
I'm looking for 950.00 but will accept reasonable offers and a lower price without the steering.
This pic is before the over axle track bar mount was added.
Last edited by busted-knuckles; 07-09-2013 at 04:38 PM.
07-10-2013, 10:01 AM
#3
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Yes I do. Also have 2 sets of 3.55's for a 8.25 and an extra carrier. Along with 3 shafts for a 8.25 27 spline. Shot me an offer for whatever your interested in.
Last edited by busted-knuckles; 07-10-2013 at 10:03 AM.
07-13-2013, 08:46 PM
#4
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Looking for 650 for the dana 30 with stock steering that has beefer tie rod, and will throw in extra 3.55 gears for a dana 30, extra shafts. Also will include a 8.25 with 2 sets of 3.55's, an extra carrier, and extra shafts.
Trending Topics
08-27-2013, 10:49 PM
#10
Senior Member
Thread Starter
Join Date: Oct 2011
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
No sorry sold that with the axle. Only have axle parts left.
Do have a black hood with pealing clear coat but no dents!
A straight passenger side fender baby blue. 91
A black hatch from a 93
A baby blue header panel. 91
Black soft 8 rims. 5x4.5 3.75 back spacing, 8" width.
Still have a complete 8.25 27 spline with bad gears but have a set of 3.55's and spear carrier to go with it. Spare shafts.
Home made tube doors that will drop right in on a pre 97 xj. Drivers has a mirror.
Do have a black hood with pealing clear coat but no dents!
A straight passenger side fender baby blue. 91
A black hatch from a 93
A baby blue header panel. 91
Black soft 8 rims. 5x4.5 3.75 back spacing, 8" width.
Still have a complete 8.25 27 spline with bad gears but have a set of 3.55's and spear carrier to go with it. Spare shafts.
Home made tube doors that will drop right in on a pre 97 xj. Drivers has a mirror.
Thread
Thread Starter
Forum
Replies
Last Post
Lightning_19k
Modified XJ Cherokee Tech
14
10-03-2015 09:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)