xj 12inches 39'' irocks frame discusion
#1
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89/95
Model: Cherokee
Engine: 4.0
xj 12inches 39'' irocks frame discusion
the reason of the comments/questions was to find out about the computers of the 97 xj and the 06 rubi not to stir up a bunch of bs. i bout an 06 rubi at an insurance auction it has the 39'' irocks on it and 10 '' of lift it has been destroyed in a wreck i thought it would be easier to put the frame under the xj mainly for the coils in the rear i but however i spoke with austin at rustys off road and he told me that the coil setup in the rear of the rubi would hurt me as far as the flex goes that i would have to do a longarm system that would have to be custom and it would be better for all of it to be custom my main concern was the unibody wasnt thick enough to weld that much to and /or able to support everything but i appreciate the advice of it being a bad idea i have lifted everything from a limo to trucks they have all had a good foundation to weld to so sorry for the criticism but i ride a lot harder than most ive seen and want my xj to go when and where needed. by the way im 25 years old (im the one responsible for the project not the one that owns this account) and have a lot of experience in the off road world and am known to have the biggest and baddest vehicles around my area
#3
aka Wade-O
Join Date: Dec 2008
Location: IN
Posts: 3,703
Likes: 0
Received 10 Likes
on
9 Posts
Year: 1989 Comanche
Model: Cherokee
Engine: 4.0
a) i dont see what there is to discuss
b) maybe next time you type something you could use some punctuation
c) if your worried about having a frame then just buy another TJ and swap parts.
b) maybe next time you type something you could use some punctuation
c) if your worried about having a frame then just buy another TJ and swap parts.
#4
Senior Member
Join Date: May 2009
Location: The Dirty 530
Posts: 800
Likes: 0
Received 3 Likes
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0 Renix I6
#6
Member
Join Date: Sep 2008
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0L high output
try looking into v8 swaps theres a lot to do with computer hook ups on those. it might provide the the info you need, i know with v8 swaps they use the pcm from the motor being swapped, and the original jeeps ecm.
other than that dont know much. try lookinon maybe novak or advanced adapters for more info.
good luck on your project.
other than that dont know much. try lookinon maybe novak or advanced adapters for more info.
good luck on your project.
#7
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89/95
Model: Cherokee
Engine: 4.0
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89/95
Model: Cherokee
Engine: 4.0
#9
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89/95
Model: Cherokee
Engine: 4.0
try looking into v8 swaps theres a lot to do with computer hook ups on those. it might provide the the info you need, i know with v8 swaps they use the pcm from the motor being swapped, and the original jeeps ecm.
other than that dont know much. try lookinon maybe novak or advanced adapters for more info.
good luck on your project.
other than that dont know much. try lookinon maybe novak or advanced adapters for more info.
good luck on your project.
#10
Senior Member
Join Date: May 2009
Location: The Dirty 530
Posts: 800
Likes: 0
Received 3 Likes
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0 Renix I6
this isnt my post. as you can see if you look at my pictures my xj is obviously still stock. the one with the post is a friend of mine that was looking for certain answers. he is know around our area for having the biggest and baddest vehicles. and i mean no disrespect to anyone by this but everyone telling me i need to go to http://www.pirate4x4.com/forum/is getting nowhere because the one your talking about is a friend of mine not me. i joined this because i like the site and it has helped me several times. he got on stirring up trouble becasue he didnt get answers that he was looking for.
Your not "him" huh? then may I suggest getting a new account, so your not associated with his posts?
As far as your "build" is concerned, there's plenty of options out there for conversions, fabrication, ect.... It's just a matter of money, and some skill. If you guys really want to build this beastly rubicon, then pirate 4x4 is actually a good place to go for hard core fab ect.
Last edited by fallenknight308; 10-11-2009 at 07:03 PM.
#11
Junior Member
Thread Starter
Join Date: Sep 2009
Location: Alabama
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89/95
Model: Cherokee
Engine: 4.0
I only suggested it, because thats where all the big, bad, scawee 4x4s are at.
Your not "him" huh? then may I suggest getting a new account, so your not associated with his posts?
As far as your "build" is concerned, there's plenty of options out there for conversions, fabrication, ect.... It's just a matter of money, and some skill. If you guys really want to build this beastly rubicon, then pirate 4x4 is actually a good place to go for hard core fab ect.
Your not "him" huh? then may I suggest getting a new account, so your not associated with his posts?
As far as your "build" is concerned, there's plenty of options out there for conversions, fabrication, ect.... It's just a matter of money, and some skill. If you guys really want to build this beastly rubicon, then pirate 4x4 is actually a good place to go for hard core fab ect.
#13
Senior Member
Join Date: May 2009
Location: The Dirty 530
Posts: 800
Likes: 0
Received 3 Likes
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4.0 Renix I6
Here's the kind of sickness that goes on in fabrication land when taken too far
http://www.pirate4x4.com/forum/showthread.php?t=705961
http://www.pirate4x4.com/forum/showthread.php?t=705961
Last edited by fallenknight308; 10-13-2009 at 12:55 AM.