Ok i don't know if there is a fourm like this up so yeah. what is the worst thing you have done to your jeep.
so far i have warped the rotors and broken the oil pressure guage while mudding.
so far i have warped the rotors and broken the oil pressure guage while mudding.

Senior Member
Nice TNXJ!
Umm prolly the Cage Offroad 4" kit. It sucks. Nothing left of it on my Jeep now.
And DDing long arms with all thread and bushings. They clunk without jam nuts and it's annoying lol. Gonna be fixed on a week or 2 though finally.
Umm prolly the Cage Offroad 4" kit. It sucks. Nothing left of it on my Jeep now.
And DDing long arms with all thread and bushings. They clunk without jam nuts and it's annoying lol. Gonna be fixed on a week or 2 though finally.
Member
well in the time of one month I managed to hit two deer broke an axle and blew the motor in my 89 xj but every cloud has a silver lining cuz after all that I bought a 96 xj and I now can build the heck out of the 89 as it will not be the DD.
Seasoned Member
on my XJ i bent both my upper and lower control arms, cracked a rotor, and bent the trackbar all in one trip
on my ZJ i blew a front CV driveshaft, both CV axle shafts, the trackbar, powersteering pump, gearbox, and passenger side caliper in one trip.
on my one MJ i, well actually my dad, plugged the PCV valve and blew out the rear main seal and drove it without oil. Needless to say i am going to be building a 4.6 stroker motor for it
on my ZJ i blew a front CV driveshaft, both CV axle shafts, the trackbar, powersteering pump, gearbox, and passenger side caliper in one trip.
on my one MJ i, well actually my dad, plugged the PCV valve and blew out the rear main seal and drove it without oil. Needless to say i am going to be building a 4.6 stroker motor for it

Senior Member
Oh and snapped a Rustys track bar in half, bent a 8.25 shaft, sliced one lug pretty much clean off and 3 more in half of my brand new Toyo with my rear quarter panel testing flex for bumpstops....spotter wasn't watchin...and, bent a main leaf on my RC springs.
Seasoned Member
Quote:
Originally Posted by broncofire75
Oh and snapped a Rustys track bar in half.
Gee that sounds familiar...i had the same thing happen to me. Also split a welded Dana35 carrier in half and shot it through the diff cover
CF Veteran
took my doors off by the bolts instead of doing the mod... now they won't line back up and my passenger side hinge is comming off the welds.
CF Veteran
Don't know where to start. Broken right rear axle, transfer case explosion, whole right side under water, too many dents to list.
CF Veteran
Quote:
Originally Posted by bigomudders
Don't know where to start. Broken right rear axle, transfer case explosion, whole right side under water, too many dents to list.
Shall we provide pics for proof? I think we shall.



And let's not forget the spider gears in your front axle.



