What's the best way to ground one? Or where is the best spot to ground it? And how do I go about doing it?

 

Theres a ground for the tail lights you can use. Its behind the drivers side trim panel where the spare mounts. Just take a ring terminal and put it on an 8ga wire attach it to a mounting bolt on your mount. run it thru to the ground wire for the lights and strip about 2-3" of wire and wrap it around the screw then just resnug the bolt. I believe its a 5/16th screw

 

Thank you. I think I will probably be doing that tomorrow. Now how would I do it if I decided to do a magnetic mount?

 

Mag mount grounds to the roof or it should at least. Iirc the lil wil antenna my dad has has an adjustment **** you could probably just strip enough wire to wrap around the screw end of it. Btw be careful when tightening the screw down first time I did the ground wire for my amp I over did it and broke the wires lol.

 

This is where I mounted mine. It looks like it would be in the way but it's not. My #12s fit just fine with out any problem.

 

Thanks man. I'm heading to radio shack to get some stuff and hopefully Ill get everything installed

 

No problem man glad I could help

 

Advanced search for radio + mount yields this:
https://www.cherokeeforum.com/search...archid=4315076

 

I went up the the truck stop today and got a heavy duty magnetic mount an put it on and ran my coax cable. I think having the antenna really makes the jeep

 

Dang nice looking jeep man. What lift and tire combo are you running

 

4.5" up from and about 3-4" in the back. And it had all 4 Dayton timberline mud terrains 33x12.5x15s on it but someone slashed the front two before I got it. So I've got 2 BFG all terrains up front 33x12.5x15s I'm hoping to put 2 more in the back soon.

 

Dang looks good man

 

Thanks man.

 

Any time man. Just wondering did you wire up the light on the fender flairs?

 

It was already wired. I'm taking them off thoug because they are the flares from a wrangler