What did you do to your Cherokee today?
CF Veteran

Joined: Jul 2012
Posts: 4,104
Likes: 2
From: San Antonio, TX
Year: 1996
Model: Cherokee
Engine: 4.0L
Finally got around to replacing the front hubs. I'm pretty sure they needed replaced when I got the thing. I found time for it today though because the front left had about 20 pounds of mud caked around the rim, and another 10 or so caked on everything else. I tried many times to run it through puddles/rain storms/etc and all the other ones got cleaned well but that one just refused to get clean.
Got all the mud and crud out of there and it looked like I slit my poor XJ's throat right there in the driveway. Hub replacement went well.
While I was down there I noticed I bent my tie rod somehow. Not a big bend but I should have noticed it when I inspected the XJ before driving home after wheeling last weekend.
Got all the mud and crud out of there and it looked like I slit my poor XJ's throat right there in the driveway. Hub replacement went well.
While I was down there I noticed I bent my tie rod somehow. Not a big bend but I should have noticed it when I inspected the XJ before driving home after wheeling last weekend.
I used the factory shock bolting location on the axle to mount the bpe. If I didn't turn it, I wouldn't have been able to bolt it down cause of the location of the uprights. I'll try to get a closer pic up soon.
No, I don't lick fish.



Joined: Mar 2011
Posts: 11,169
Likes: 26
From: Northern Kentucky
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Man, that's lookin' great!
Nice! You're gonna love 'em!
Senior Member
Joined: Nov 2013
Posts: 503
Likes: 0
From: Jax, FL
Year: 1998
Model: Cherokee
Engine: 4.0L
I blasted a ton into the rails so I was nervous about using heat. Came out today.... great success!!!









