What did you do to your Cherokee today?
CF Veteran
Joined: Nov 2009
Posts: 1,261
Likes: 0
From: New Jersey
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Today, I started putting my 2" coil spacer/shackle RC lift on. I got the rear shackles on and managed to break all four upper shock mount bolts. I went to put the front coil spacers in, but realized I couldn't do it without a spring compressor. I held each rear shock on with one bolt and one of them let loose on the way home from my buddy's house, so now that's flopping around and I have to fix it. And last, but not least, I stripped out the threads for the coil-spring-hold-down-tab bolt. So, tomorrow, I have to fix the stripped threads and the rear shock mounts. Then I'll be able to add my coil spacers up front. Sheesh, what a day!
Junior Member
Joined: Nov 2008
Posts: 71
Likes: 0
From: Mackeyville, Pa.
Year: 1989
Model: Cherokee
Engine: 4.0 I6
Picked up the two piece bushing pack for the trackbar as well as two new stabilizer down links and bushings. Wanted to get them on today but Mother Nature had differant plans for North Central Penna..
Decided to treat it after it turned over 250k. Picked up an K&N intake (only because of CARB) and got the supplies to change all the fluid in the drive-train, Transmission, t-case, and both differentials. now I can start planning the modifications I want to do.
Junior Member
Joined: Dec 2008
Posts: 35
Likes: 0
From: Gladstone, OR
Year: 1990
Model: Cherokee
Engine: 4.0
Put in new fuel injectors, now I just have to wait for Autozone to ship me my rear driveshaft U-joints! For those of you that are curious, I used these injectors: http://fuelinjectorconnection.com/sh...&productId=159
I'll try and post an update as to their performance when I get to drive her again.
I'll try and post an update as to their performance when I get to drive her again.






