What did you do to your Cherokee today?
CF Veteran
Joined: Jul 2011
Posts: 4,521
Likes: 1
From: JOCO
Year: 1999
Engine: 4.0 Inline 6
Tested the fit today again after welding the second b-pillar support brackets on. Fits pretty good. Not great but good. Still got to weld the feet on the short support legs. Got to find some 3/16"x2" angle for that.
Seasoned Member
Joined: Jun 2012
Posts: 380
Likes: 4
From: Vancouver BC
Year: 1998
Engine: 4.0
Not rly fab to me. More like 'modification'. Its out of a late 70's full sized dodge so idk what kind of tubing it is but its plenty thick.
Tested the fit today again after welding the second b-pillar support brackets on. Fits pretty good. Not great but good. Still got to weld the feet on the short support legs. Got to find some 3/16"x2" angle for that.
CF Veteran
Joined: May 2011
Posts: 2,320
Likes: 0
From: Aurora, Co
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Originally Posted by bheath
Not rly fab to me. More like 'modification'. Its out of a late 70's full sized dodge so idk what kind of tubing it is but its plenty thick.
Tested the fit today again after welding the second b-pillar support brackets on. Fits pretty good. Not great but good. Still got to weld the feet on the short support legs. Got to find some 3/16"x2" angle for that.
CF Veteran
Joined: Jul 2011
Posts: 4,521
Likes: 1
From: JOCO
Year: 1999
Engine: 4.0 Inline 6
Senior Member
Joined: Apr 2012
Posts: 735
Likes: 0
From: Los Banos CA
Year: 2000
Model: Cherokee
Engine: 4.0
Not today, but over the last week or so
-New head unit with 7" screen also put in 7" screens in head rests (great for the kids
) Have the back screens wired to a switch to manually turn them on or off
-Front and rear reverse camera's w/ inferred night vision witch sucks (didnt think of it but they are mirrored and the front is.. yea, need to get a different one) This is also on a switch and automatically only shows on the front screen.
-Also put in a DIY switch to control the camera's. Put it where the little dish is between the shifter and ebrake. Controls the video input and supply's power to the camera's one at a time.
-Replaced the TPS sense it went out on me the last time i went wheeling, spitting and spuddering trying to get back home.
-New head unit with 7" screen also put in 7" screens in head rests (great for the kids
) Have the back screens wired to a switch to manually turn them on or off-Front and rear reverse camera's w/ inferred night vision witch sucks (didnt think of it but they are mirrored and the front is.. yea, need to get a different one) This is also on a switch and automatically only shows on the front screen.
-Also put in a DIY switch to control the camera's. Put it where the little dish is between the shifter and ebrake. Controls the video input and supply's power to the camera's one at a time.
-Replaced the TPS sense it went out on me the last time i went wheeling, spitting and spuddering trying to get back home.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6