What did you do to your Cherokee today?
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0
Oh gawd more drama.
Everyone go read this again and get back on topic for god sake:
https://www.cherokeeforum.com/f9/im-...-fight-157032/
anyways, found out the blower on my fan is about to seize, so i made a horrible attempt to pull a new one from the JY 40 minutes before closing.
Everyone go read this again and get back on topic for god sake:
https://www.cherokeeforum.com/f9/im-...-fight-157032/
anyways, found out the blower on my fan is about to seize, so i made a horrible attempt to pull a new one from the JY 40 minutes before closing.
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Seasoned Member
Joined: Sep 2012
Posts: 446
Likes: 0
From: Long Island, NY
Year: 1998
Model: Cherokee
Killed myself installing my rustys 3.5 rear leafts and rough country shocks. The passenger side.took me and hour. The driver side 6hours! Bastard eye bolt would not come out and tried sawzawll and it was.slowly working until.my hand got punded into the cement by it. Thought I broke my finger. Went out and got a grinder and cut my old leaf pack.off. then spent time hacking away at the old.eye bolt. Finally.got.it off then had to go.and get new hardware for the eye part. Did that then the leaf was a pain in the *** getting in because I didn't want to stretch the crap.out of my brake line.. but all.done after way to much time and frustration. I'm doing the front springs, shocks, and adj track bar tomorrow. Also doing my 1" tc drop kit... the truck.has very dab vibes.
Here how she sat tonight.
..
Here how she sat tonight.

..
CF Veteran
Joined: Nov 2010
Posts: 15,581
Likes: 8
From: some small town oregon
Year: 1989
Model: Cherokee
Engine: 4.0
Killed myself installing my rustys 3.5 rear leafts and rough country shocks. The passenger side.took me and hour. The driver side 6hours! Bastard eye bolt would not come out and tried sawzawll and it was.slowly working until.my hand got punded into the cement by it. Thought I broke my finger. Went out and got a grinder and cut my old leaf pack.off. then spent time hacking away at the old.eye bolt. Finally.got.it off then had to go.and get new hardware for the eye part. Did that then the leaf was a pain in the *** getting in because I didn't want to stretch the crap.out of my brake line.. but all.done after way to much time and frustration. I'm doing the front springs, shocks, and adj track bar tomorrow. Also doing my 1" tc drop kit... the truck.has very dab vibes.
Here how she sat tonight.
..
Here how she sat tonight.
..
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
GET THAT **** OFF NOW. Why? You said you're a cert, think about it. You take a hard turn, those brackets are NOT reinforced side-to-side, so all of the force in a turn goes to the forward mounts. And guess what happens when they fail? Pop goes the fuel tank spilling combustible gasoline all over the damn place, maybe even on your HOT exhaust system. Your drive line will probable get all ****ed up from being misaligned, and your axle just might break free and hit an oncoming car square in the windshield. OOPS, you just decapitated a random innocent and burned your jeep to the ground because you didn't want to spend $40.
That's worst-case scenario of course, but it's something to think of. Just spend the $40 to get properly machined brackets.
Last edited by 1976Mustang; Jan 4, 2013 at 11:20 PM. Reason: I got a ticket from the GrammarNazis
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0
Ok i just spent the time to look back about 10 pages and see what the fussing was about. All i have to say is:
GET THAT **** OFF NOW. Why? You said you're a cert, think about it. You take a hard turn, those brackets are NOT reinforced side-to-side, so all of the force in a turn goes to the forward mounts. And guess what happens when they fail? Pop goes the fuel tank spilling combustible gasoline all over the damn place, maybe even on your HOT exhaust system. Your drive line will probable get all ****ed up from being misaligned, and your axle just might break free and hit an oncoming car square in the windshield. OOPS, you just decapitated a random innocent and burned your jeep to the ground because you didn't want to spend $40.
That's worst-case scenario of course, but it's something to think of. Just spend the $40 to get properly machined brackets.
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0
CF Veteran
Joined: Nov 2010
Posts: 3,251
Likes: 0
From: Frisco, Tx
Year: 1994
Model: Cherokee
Engine: 4.0



opcorn