What did you do to your Cherokee today?
Senior Member
Joined: Oct 2012
Posts: 857
Likes: 0
From: Parlin NJ/Staten Island NY
Year: 2000
Model: Cherokee
Engine: 4.0
Isnt the tire relations gonna be pretty close to the rim? I know its possible for the tires to be a lil off, they are rubber. But if it were way off they would drive like crap anyway.
Swirl, your method your using 3 reference points correct? one point at the sidewall of the rear tires and the two points on the front tires sidewall?
Swirl, your method your using 3 reference points correct? one point at the sidewall of the rear tires and the two points on the front tires sidewall?
Junior Member
Joined: Jul 2010
Posts: 56
Likes: 0
From: chesapeake
Year: 1998
Model: Cherokee
Engine: 4.0L
finally got the flush my coolant system and found that my heater core was completely clogged so flushed it backward and with great persistence busted the crud loose to achieve great heat
Member
Joined: Oct 2012
Posts: 209
Likes: 0
From: Poconos, PA
Year: 1992
Model: Cherokee
Engine: 4.0 I6
Just did the seafoam treatment. The jeep has 245K on it and holy hell was it a good smoke show. Idle rpms have lowered, throttle seems smoother. Going to do the oil change tomorrow since who knows when it last had one.
Senior Member
Joined: Jan 2011
Posts: 586
Likes: 0
From: northside chicago
Year: 1997
Model: Cherokee
Installed an Hid kit I bought at the junkyard for $20......yes $20!! both ballasts and bulbs. Got them from a Honda so bulbs were a direct fit. I already had those cheap headlight H4 conversion from eBay installed lolz lucky me today =p
Seasoned Member
Joined: Nov 2012
Posts: 446
Likes: 0
From: White Cloud,Michigan
Year: 1996
Model: Cherokee
Engine: 4.0L I6 HO
Aux lights were pointless this morning. TO MUCH FOG. It was like trying to find my way back to bed, after using the bathroom in the middle of the night.
Senior Member
Joined: May 2010
Posts: 824
Likes: 0
From: North Carolina
Year: 2000
Model: Cherokee
Engine: inline 6 4.0 lt
took my rear bumper off to install my tow hitch and a zj v8 gas tank skid plate. well i held then skid up the holes lined up but there was a 10-12" gap between the bottom of the tank and the skid. so it didnt go on. i figure with some cutting and rewelding of the skid it will fit. but i got the hitch on then put my bumper back on. i now have rear tow points for wheeling and for hauling stuff. but mostly for wheeling.
Senior Member
Joined: Apr 2012
Posts: 735
Likes: 0
From: Los Banos CA
Year: 2000
Model: Cherokee
Engine: 4.0
Drove it to my grandmas for thanksgiving. Had to "tap" my starter again this morning. Just the first start of the day. Fine afterwards though. 3rd day in a row I had to whack the sob
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by 89cherokee2gtmudy
Drove it to my grandmas for thanksgiving. Had to "tap" my starter again this morning. Just the first start of the day. Fine afterwards though. 3rd day in a row I had to whack the sob
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
Originally Posted by Sno_Blynd
took my rear bumper off to install my tow hitch and a zj v8 gas tank skid plate. well i held then skid up the holes lined up but there was a 10-12" gap between the bottom of the tank and the skid. so it didnt go on. i figure with some cutting and rewelding of the skid it will fit. but i got the hitch on then put my bumper back on. i now have rear tow points for wheeling and for hauling stuff. but mostly for wheeling.
Senior Member
Joined: May 2010
Posts: 824
Likes: 0
From: North Carolina
Year: 2000
Model: Cherokee
Engine: inline 6 4.0 lt
