What did you do to your Cherokee today?
CF Veteran
Joined: Oct 2011
Posts: 1,812
Likes: 0
From: South Mills, NC
Year: 1998
Model: Cherokee
Engine: Rebuilt 4.0L I6
Made a center console bracket today cause my old plastic one was in 7 pieces. Its made of 16 gauge steel. Sorry crappy cellphone pictures
Herp Derp Jerp
Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Resumed work on the 8.25. All remnants of the drum brakes gone, pounded out the studs, and started the loong cleaning process. I'd say I'm maybe 50% done the top lol. Left the diff cover on to keep out the junk
I need to find something smaller than my 4.5" angle grinder's wire brush to get into those small crevices. All the gunk in there is still wet from spraying brake cleaner
CF Veteran
Joined: Jan 2011
Posts: 1,762
Likes: 0
From: Randoph ohio!
Year: 98
Model: Cherokee
Engine: 4.0L
Originally Posted by 98 brutus
Well im about to do this after I type this out, clean off the rust on the bottom side of the jeeps front doors while I have them off then figure out why my windows don't roll up or down for my passengers? Only the driver door switch works the other 3 doors don't work what so ever hmmm been like this since I purchased 2+ years ago
Tom is a new day
Member
Joined: Jul 2009
Posts: 153
Likes: 0
From: Kiln MS
Year: 1990
Model: Cherokee
Engine: 4.0 Renix
CF Veteran
Joined: Jan 2011
Posts: 1,762
Likes: 0
From: Randoph ohio!
Year: 98
Model: Cherokee
Engine: 4.0L
Originally Posted by salad
Niiice
Resumed work on the 8.25. All remnants of the drum brakes gone, pounded out the studs, and started the loong cleaning process. I'd say I'm maybe 50% done the top lol. Left the diff cover on to keep out the junk
I need to find something smaller than my 4.5" angle grinder's wire brush to get into those small crevices. All the gunk in there is still wet from spraying brake cleaner
Newbie
Joined: Aug 2012
Posts: 3
Likes: 0
From: Tennessee Valley
Year: 2001
Model: Cherokee
Engine: 4.0
Well im about to do this after I type this out, clean off the rust on the bottom side of the jeeps front doors while I have them off then figure out why my windows don't roll up or down for my passengers? Only the driver door switch works the other 3 doors don't work what so ever hmmm been like this since I purchased 2+ years ago
CF Veteran
Joined: May 2012
Posts: 3,242
Likes: 2
From: Colorado
Year: 1992 Cherokee Sport
Engine: Bone-Stock 242
Murdered my GPS in it. The stupid ****ing suctioncup mount failed and the GPS fell, hanging by it's cord. Opened the door to get in, didn't see the GPS in the jamb and slammed the door on it. 
Whole thing is bent now. And Garmin doesn't cover accidental damage in its warranty.
Whole thing is bent now. And Garmin doesn't cover accidental damage in its warranty.
Newbie
Joined: Aug 2012
Posts: 3
Likes: 0
From: Tennessee Valley
Year: 2001
Model: Cherokee
Engine: 4.0
Parked the Cherokee last night, No start this morning. Replaced the CrankPositionSensor. What a pain in the **** to get to. A "GOOD" 11mm swivel socket woulda made the job so much easier. Its running like a top now.
CF Veteran
Joined: Aug 2012
Posts: 1,592
Likes: 0
From: oregon
Year: 1993
Model: Cherokee
Engine: 4.0 ho 99 intake ps pump 1" tb spacer 62mm bored tb eletric fans and more
what i do is i drop the cross member and use a extention to get them
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I hope that isn't the paperclip 'fix.' That's a fire hazard. I got lucky with my '01. A can of compressed air to clean out the 11 year buildup of dust, crumbs, and bugs, and it worked like new.
