What did you do to your Cherokee today?
Senior Member
Joined: Oct 2008
Posts: 544
Likes: 0
From: Orlando FL.
Year: 1996
Model: Cherokee
Engine: 242 6cyl
I just found out i need to do just a little more work to her lol the damn driveshaft u-joints are bad can you guys guess what ill be doin tomm. lol.....
Junior Member
Joined: Jan 2009
Posts: 98
Likes: 0
Year: 1997
Model: Cherokee
Engine: 4.0
swapped out my 30" revos's for my 31" BFG's. installed my T-case drop, added spacers to the steering stops.
gotta say 31's on a 4" lift look SMAAAALLLLL!!!!!! much more agressive than the 30's tho.
hopefully by the end of the week I should have the alignment done.
gotta say 31's on a 4" lift look SMAAAALLLLL!!!!!! much more agressive than the 30's tho.
hopefully by the end of the week I should have the alignment done.
Junior Member
Joined: Nov 2008
Posts: 71
Likes: 0
From: Mackeyville, Pa.
Year: 1989
Model: Cherokee
Engine: 4.0 I6
I'd just take it in to the dealer and tell them that there is a recall. They'll do their thing and you should be fine. With my Cat, they initially told me they'd charge if there was welding 
. When I told them there wasn't so don't charge, they called later saying the muffler was shot so there will be charges. Screw that. I'll deal with what goes behind the Cat on my own. The moral of this story is to make sure they only deal with the recall and tell them they can't do any service that they are going to charge for. Keep them honest. I know Chrystler is in trouble, but I'm not going to help them by getting worked over. Let us know how it goes. 
s
. When I told them there wasn't so don't charge, they called later saying the muffler was shot so there will be charges. Screw that. I'll deal with what goes behind the Cat on my own. The moral of this story is to make sure they only deal with the recall and tell them they can't do any service that they are going to charge for. Keep them honest. I know Chrystler is in trouble, but I'm not going to help them by getting worked over. Let us know how it goes. s
UPDATE ; Got a reply from Chrysler LLC today with good news
They tell me they are happy to confirm that the work has not been done and to go to the nearest Jeep stealer and arrange for an inspection of the work to be done. AND the recall services are performed FREE of charge
That would be this Friday.
Thanks Guy's, this would not have happend if it hadn't been for this site.
GTP
CF Veteran
Joined: Oct 2008
Posts: 1,052
Likes: 0
From: Wyo
Year: 1996
Model: Cherokee
UPDATE ; Got a reply from Chrysler LLC today with good news
They tell me they are happy to confirm that the work has not been done and to go to the nearest Jeep stealer and arrange for an inspection of the work to be done. AND the recall services are performed FREE of charge
That would be this Friday.
Thanks Guy's, this would not have happend if it hadn't been for this site.
GTP
They tell me they are happy to confirm that the work has not been done and to go to the nearest Jeep stealer and arrange for an inspection of the work to be done. AND the recall services are performed FREE of charge
That would be this Friday.
Thanks Guy's, this would not have happend if it hadn't been for this site.
GTP
s
CF Veteran
Joined: Oct 2007
Posts: 3,883
Likes: 6
From: W-PA
Year: 2001
Model: Cherokee
Engine: 4.0
Started it up.
Turned on the flux capacitor heat machine.
Drove to work.
Turned off the flux capacitor heat machine.
Turned off jeep.
(8 hours later)
Started it up.
Turned on wipers.
Turned on rear wipers.
Drove home.
Turned off both wipers.
Turned off jeep.
Locked doors.
That's about it.
Turned on the flux capacitor heat machine.
Drove to work.
Turned off the flux capacitor heat machine.
Turned off jeep.
(8 hours later)
Started it up.
Turned on wipers.
Turned on rear wipers.
Drove home.
Turned off both wipers.
Turned off jeep.
Locked doors.
That's about it.
CF Veteran
Joined: Jul 2008
Posts: 1,217
Likes: 7
From: Schnecksville, PA
Year: 94 XJ
Model: Cherokee
Engine: 4.0L
Got tired of "Lil Red" marking his territory.
Went to A/Z and got a new valve cover gasket.
Discovered that he has a thirst for tranny fluid too.
Where is it going?
No clue. But I did see some ultra-copper around the transpan and the ever popular wetness.
Valve cover tomorrow.
Perhaps tranny pan this w/e
Bit the bullet and decided to give Lil Red a set of A-pillar light mounts.
Started prepping and snapping more pics.
Thanks to Clay's help and input, these will be mounted at the lower location.
And thanks to a materials ordering mix-up, there just MAY be snorkel-friendly A-pillar mounts coming.
Pics to come.
Went to A/Z and got a new valve cover gasket.
Discovered that he has a thirst for tranny fluid too.
Where is it going?
No clue. But I did see some ultra-copper around the transpan and the ever popular wetness.
Valve cover tomorrow.
Perhaps tranny pan this w/e
Bit the bullet and decided to give Lil Red a set of A-pillar light mounts.
Started prepping and snapping more pics.
Thanks to Clay's help and input, these will be mounted at the lower location.
And thanks to a materials ordering mix-up, there just MAY be snorkel-friendly A-pillar mounts coming.
Pics to come.
CF Veteran
Joined: Dec 2008
Posts: 2,103
Likes: 3
From: Las Vegas, NV
Year: 1995
Engine: 4.0L
Dropped mine off at the shop to have my air conditioning and radiator fan, as well as the evap purge solenoid problems resolved. I think it's an electrical problem. Anything beyond fuses is beyond my know-how.
CF Veteran
Joined: Feb 2009
Posts: 7,244
Likes: 0
From: socal
Year: 2000
Model: Cherokee
Engine: 4.0
found out my staun tire defeaters should be here Monday finally. every body has been sold out of these for the last month.and ordered my nates 4x4 front slimline bumper yesteday. needless to say i am broke for a while