What did you do to your Cherokee today?
Senior Member
Joined: Sep 2009
Posts: 886
Likes: 0
From: Olean NY where salt eats jeeps
Year: 1995
Model: Cherokee
Engine: 4.0L
Mounting my flares this weekend to my chopped fenders and I'm going to try and reusing my inner plastics to keep crud out of my door jams 
Any ideas you guys have that could help me?
Any ideas you guys have that could help me?
Senior Member
Joined: Sep 2009
Posts: 886
Likes: 0
From: Olean NY where salt eats jeeps
Year: 1995
Model: Cherokee
Engine: 4.0L
Originally Posted by GreenXJ95
Mounting my flares this weekend to my chopped fenders and I'm going to try and reusing my inner plastics to keep crud out of my door jams
Any ideas you guys have that could help me?
Any ideas you guys have that could help me?
CF Veteran
Joined: May 2010
Posts: 3,405
Likes: 2
From: Fort Collins, CO
Year: 1996
Engine: 4.0L HO
Took me 2 hours. An hour of that was trying to make my illuminated switch work for this which I gave up (the only way to make it light up would send 12v through the wire to the ECM which would be bad)
30 minutes of it was organizing the wires under my dash
30 minutes of it was organizing the wires under my dash
Member
Joined: Oct 2010
Posts: 186
Likes: 0
From: O'Fallon Missouri
Year: 1996
Model: Cherokee
Engine: 4.0 High Output
CF Veteran
Joined: May 2010
Posts: 1,187
Likes: 33
From: Boston
Year: 2000
Engine: 4.7L
Basket Case
Modified dealer-option cargo basket (bought not built when purchased XJ in '99). This is the prototype jigged in-place on the ute bars for carrying to body shop to weld tomorrow morning. Will post pic after basket is all stitched/welded and the rooftop is loaded with cargo. I will then be able to carry my Hobie and use the basket for all the wet gear (or otherwise). Additional options included in this mod has drop-in sections (to close gaps) and the dimensions allow 90deg rotation/mount lengthwise on roof top.
Junior Member
Joined: Aug 2011
Posts: 89
Likes: 0
From: Living on a farm in Farmville!
Year: 1998
Model: Cherokee
Engine: 4.0
Finally had the time to finish up installing a new power steering pump and flushed the power steering system. I greased everything that has a fitting and some things that didn’t plus I topped of the diff’s with 90W. Tomorrow I am pulling the driver’s seat because right now it’s a rocking chair!
CF Veteran
Joined: Sep 2010
Posts: 1,992
Likes: 0
From: West Bloomfield,MI
Year: 1996
Model: Cherokee
Engine: 4.0L, CAI, Edelbrock Breather, Optima Yellowtop
Member
Joined: Oct 2010
Posts: 186
Likes: 0
From: O'Fallon Missouri
Year: 1996
Model: Cherokee
Engine: 4.0 High Output
Went to pick up 6 light fixtures that were free on Craigslist. Two of the globes broke driving back. Didn't need those particular lights, but I should have taken the smoother riding GrandPArquis.
CF Veteran
Joined: Apr 2009
Posts: 1,109
Likes: 3
From: Austin, Texas
Year: 1991
Engine: 4.0 I-6 H.O.
rolled my fender lips and gained about 1.25" of clearance all around.
fixed my rear brake cylinder.
Installed my steel shift fork on the vacuum disco
Good day
fixed my rear brake cylinder.
Installed my steel shift fork on the vacuum disco
Good day
Senior Member
Joined: Mar 2011
Posts: 770
Likes: 1
From: VA
Year: 2000
Model: Cherokee (XJ)
Engine: 4L, 6 cylinder, 190 hp, 225 ft lp torque
tie downs
installed new equipment tie downs. rears screwed into frame work. wheel well d-rings bolted with carriage bolts.
