aircruiser

yeah tell me about it..i filled up yesterday with a gift gas card and im just over half a tank today..but ive done ALOT of driving since then. took my girlfriend out to eat last night and that was an hour drive each way (took her to this cool 50's resteraunt that was way out of the way). today just drove around some more and did a little wheeling and then hit some snow banks..haha

BuckB91XJ

I got the Sony Xplode 6x9s put in the hatch. It took a bit of massaging with a cutting wheel but, they do fit and they are mounted solid and they sound great. So, I have the Sony Xplode CD deck, Sony Xplode 6.5s in the front doors and Sony Xplode 6x9s in the hatch. The whole system sounds AWESOME!!!! I love it!!! Never realized just how pathetic my old system was. The deck being black matches my interior perfectly and looks OEM.

I think I'm gonna put the rear Aussie Locker in tomorrow.

lil'whiteXJ

pretended I had a snowplow on it. I made a trail so my mom in law could get her F-150 through.

siegelda

Howler has a really good segment about this. just follow the link to lil red's build on his posts. it is on page 2.

double_ot_xj

I finally got to drive the friggn thing. im back in the land of opportunity and 24 hour gas stations, $1.45 gas. ahhh its great to be back.

mudd89driver

in utah it's $1.59 for gas.

TrueBlueXJ

Changed out my headlight switch.

And started building a 1-ton Geo Tracker.

cherokeefamily

Not today, but this past weekend I put a couple of coats of primer onto the rocker/sliders that I'm getting ready to put on the wifey's '94 XJ! I should be cutting and welding sometime this week.

blacksheep

Got new kicks. Procomp 15x8 1079s and 32x11.5 BFG KM2s. The wheels are a little too shiny though, need to find a mud puddle!

mudd89driver

i fixed the coolant leak it had, runs great now

getblown5.9

I looked at it today...

its been sitting in the same spot for almost 2 months and nobody can figure out how to make it run. it makes a nice yard ornament

Belto

got it a new exhaust since the old one was ripped off wheeling yesterday

76ANTHONY

painted 2 more wheels, wooohoooo im almost there, when these are done its lift time, 3.5 inch lift with some 31's should work out just perfect.

redmuck

finally redid my homemade window vent lock. stuck in a 1 and a half inch long 7/16 carrage bolt with a silicone gasket that i cut out of a silicone pot holder. i used one of those thinner nuts with a nylon washer and tighten it up, then found an old fridgerator handle bracket, it had a nice bend in it,but i bent it a little more. stuck it on and put a wingnut on and tightened it. it managed to pull the window tighter and hopefully stop the draft noise. itll be tested tuesday when i go to work. and put oil in since i was like 2 quarts low and fill my tires with air. one tire has a slow leak.

BuckB91XJ

BlackSheep them re-ims look sharp!

I swapped out the wiper blades. That rubbing was about to drive me bonkers.

Heading out to the gargae in a few minutes to rip into the rear axle to install the Aussie I got for Christmas.