Tire size
07-25-2012, 08:29 PM
#5
Not if you do it right. Like I said. 2.5" lift and 32.5 in tire. NO rubbing. Stock flares.
Completely discoed
A few simple mods.
1. Stock backspacing(no mod here, just saying)
2. Not over a 10.5 in tire, preferably narrower.
3. Extend front and rear bump stops 2-3"( I made mine, very easy)
Now if you disco and use longer shocks, make sure the shackles are the right angle etc to get the most flex out of the suspension.
You will need the following.
1. Extended brake lines( two front, one rear)
2. Trim one inch from your front fenders( you can do this and still use the stock flares.)
3. Remove rear bumper side moulding or trim or put up with it rubbing a little.
My tires are the same height as most 33s. I run 2.5" front, 2.5in rear of lift.
Completely discoed
A few simple mods.
1. Stock backspacing(no mod here, just saying)
2. Not over a 10.5 in tire, preferably narrower.
3. Extend front and rear bump stops 2-3"( I made mine, very easy)
Now if you disco and use longer shocks, make sure the shackles are the right angle etc to get the most flex out of the suspension.
You will need the following.
1. Extended brake lines( two front, one rear)
2. Trim one inch from your front fenders( you can do this and still use the stock flares.)
3. Remove rear bumper side moulding or trim or put up with it rubbing a little.
My tires are the same height as most 33s. I run 2.5" front, 2.5in rear of lift.
Last edited by holycaveman; 07-26-2012 at 01:44 AM.
Thread
Thread Starter
Forum
Replies
Last Post
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
08-11-2020 03:22 PM
BluJay
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-09-2015 05:05 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)