Seat question
#1
Newbie
Thread Starter
Join Date: Apr 2012
Location: Clarksville TN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
Seat question
Is there a seat that will mount directly to the frame that my current seat is on with little modification or none at all? The seat in my 88 sits to high I am 6'9 and have no head room unless I turn my head sideways. I have no head room and would like a little head room since it is my DD. If my sunroof opened I suppose I could just open that and stick my head out it but the previous owner siliconed it shut because the glass did not fit properly.
Thanks in advance.
Thanks in advance.
#4
CF Veteran
Join Date: May 2011
Location: Santa Rosa, California
Posts: 2,135
Likes: 0
Received 1 Like
on
1 Post
Year: 1987 Comanche,1990
Model: Cherokee
Engine: 4.0L Renix
Get a seat that has been extremely worn LOL. My brothers seat is much lower than mine for some reason and i feel like i am in a low rider.
#6
Newbie
Thread Starter
Join Date: Apr 2012
Location: Clarksville TN
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 88
Model: Cherokee
Engine: 4.0
#7
Seasoned Member
I would take apart the seat and see if you can cut the foam down some. Wouldn't be a bad idea to try it on a cheap junk yard seat first....
Thread
Thread Starter
Forum
Replies
Last Post
gwthamm
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-04-2015 11:29 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)