s-10 leafs
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
s-10 leafs
from the search i did on s-10 bastard packs everyone was usually getting them for around $30-$50 for the pair at a pick and pull. that was alosy like 3-4 yrs ago too from what ive read. the cheapest i found aorund locally is $25-$30 each pick and pull or $50 each for them to pull it. at the most i would have $100 in a set of springs. i know the additional costs of eye bolts and clamps but i have that covered already by using hardware from the aal from a kit.
my torches are too big to fit in my jeep so all i would have it just hand tools to work with in the cold and that wont be fun.
do you think its worth the extra $50 to have them pulled or not?
cheapest set of full leafs i can find is the pro comp 53111 leafs for $104 each shipped to my door.(plus the headache of the possibility's when replacing the leafs with bolt issues)
my torches are too big to fit in my jeep so all i would have it just hand tools to work with in the cold and that wont be fun.
do you think its worth the extra $50 to have them pulled or not?
cheapest set of full leafs i can find is the pro comp 53111 leafs for $104 each shipped to my door.(plus the headache of the possibility's when replacing the leafs with bolt issues)
#3
Senior Member
Join Date: Dec 2011
Location: WV
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0 i6
#4
Junior Member
Thread Starter
Join Date: Feb 2012
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
my torches are too tall to put in the back of my jeep, unless i lay them down and im not doing that. besides i dont want to torch the actual spring because the heat will weaken the spring because of the heat transfer. the plan was to torch the shackles and hangers off. other option i thought of was to pack up my generator and use my sawzall, but i dont think ill be able to cut through the spring, or get a long enough blade to cut the shackles and hangers. then i have to put in the cost of new blades into the cost of the spring as well.
#5
Senior Member
Join Date: Dec 2011
Location: WV
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98
Model: Cherokee
Engine: 4.0 i6
my torches are too tall to put in the back of my jeep, unless i lay them down and im not doing that. besides i dont want to torch the actual spring because the heat will weaken the spring because of the heat transfer. the plan was to torch the shackles and hangers off. other option i thought of was to pack up my generator and use my sawzall, but i dont think ill be able to cut through the spring, or get a long enough blade to cut the shackles and hangers. then i have to put in the cost of new blades into the cost of the spring as well.
Thread
Thread Starter
Forum
Replies
Last Post
ra.stewart
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
02-15-2021 01:47 PM
studmuffin
Cherokee Chat
8
10-05-2015 01:54 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-02-2015 12:35 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)