Ready To Lift!!
#1
Newbie
Thread Starter
Join Date: May 2010
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
Ready To Lift!!
_
Alright i knocked everything i wanted to do before the lift out!
now ready for the lift..
thinking of starting off with 3" possibly 3.5
just want to know what is the best combo is..
(and what lift kit would be best to get)
I hear with the 3" lift i go for 31x10.5's
.
..
does anybody have any suggestions for me
(the sooner i am 100%
.........the sooner i'll be riding higher)
Alright i knocked everything i wanted to do before the lift out!
now ready for the lift..
thinking of starting off with 3" possibly 3.5
just want to know what is the best combo is..
(and what lift kit would be best to get)
I hear with the 3" lift i go for 31x10.5's
.
..
does anybody have any suggestions for me
(the sooner i am 100%
.........the sooner i'll be riding higher)
#2
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
_
Alright i knocked everything i wanted to do before the lift out!
now ready for the lift..
thinking of starting off with 3" possibly 3.5
just want to know what is the best combo is..
(and what lift kit would be best to get)
I hear with the 3" lift i go for 31x10.5's
.
..
does anybody have any suggestions for me
(the sooner i am 100%
.........the sooner i'll be riding higher)
Alright i knocked everything i wanted to do before the lift out!
now ready for the lift..
thinking of starting off with 3" possibly 3.5
just want to know what is the best combo is..
(and what lift kit would be best to get)
I hear with the 3" lift i go for 31x10.5's
.
..
does anybody have any suggestions for me
(the sooner i am 100%
.........the sooner i'll be riding higher)
my opinion is just go 4.5" from the get go, cause that is about the limit on your stock steering and stock drive shafts, plus who doesnt love 4.5"???
what options have you come up with so far??
#3
Newbie
Thread Starter
Join Date: May 2010
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
LOL!!
damn..
i guess im undecided..
originally i wanted the 4.5 lift
-but kinda convinced myself just start off with the 3"
i was thinking 4.5" with 32's..
alright so i guess 4.5 it is!!
(why not right hahaha)
-what lift kit do you recomend..
damn..
i guess im undecided..
originally i wanted the 4.5 lift
-but kinda convinced myself just start off with the 3"
i was thinking 4.5" with 32's..
alright so i guess 4.5 it is!!
(why not right hahaha)
-what lift kit do you recomend..
#6
Honorary Moderator
Join Date: Mar 2010
Location: Gilbert AZ/Las Cruces NM
Posts: 8,135
Likes: 0
Received 13 Likes
on
11 Posts
Year: 1996
Model: Cherokee
Engine: 4.0 upgraded
First you need to determine your price range.
There are many good short arm kits out there.
cheap and easy kits are:
rusty's(nice ride can be hit or miss some times)
rough country(rough ride, meant for the weekend wheeler and come in short and long arm types)
a bit more money you look into
Rubicon Express(over built for good quality)
BDS(heard good things about them)
IRO(heard good things about them as well)
clayton's(heard amazing things about them.)
OME(best ride quality you can get for your xj)
#7
Newbie
Thread Starter
Join Date: May 2010
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0L
alright kool thanks..
im going to check up on both
Rusty's and the Rubicon..
i think i may be leaning a little more
-towards the Rubicon Express lift kit..
im going to check up on both
Rusty's and the Rubicon..
i think i may be leaning a little more
-towards the Rubicon Express lift kit..
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
FS[GreatLakes]: Upgraded 4 Hole 87-98 Injectors
JeepStephie99
Engines/Tranny/T-Case
107
07-12-2016 01:58 PM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)