Quick question regarding U-Joints
#1
CF Veteran
Thread Starter
Join Date: Jun 2009
Location: Columbus, Ohio
Posts: 2,173
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
Quick question regarding U-Joints
I'm going to be doing ball joints this weekend on my 97 XJ and wanted to go ahead and do new u joints while I have the axle shafts out. Are the U-Joints on my axle shafts the same as the driveshaft U-Joints? And which spicer U-Joint should I be using? Also, where are you guys that run the spicers buying them at? I haven't found any place local that has them yet.
#3
CF Veteran
no, they are not the same as the drive shaft u-joints.
xjmarc is correct, your axle shafts joints are 5-297x.
your drive shaft uses 5-1310x.
spicer is the stock brand, usually better than what you can get from autozone. you should be able to get them from the dealer or most smaller jobbers.
xjmarc is correct, your axle shafts joints are 5-297x.
your drive shaft uses 5-1310x.
spicer is the stock brand, usually better than what you can get from autozone. you should be able to get them from the dealer or most smaller jobbers.
#4
CF Veteran
Join Date: Oct 2009
Location: Northeast CT
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4.0
Not the same as the driveshaft, your Jeep will need Spicer 5-760x's. I got mine from www.justdifferentials.com
Thread
Thread Starter
Forum
Replies
Last Post
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-10-2015 09:21 AM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 08:16 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 07:50 PM
daddytuck
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-07-2015 05:51 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)