Pics of what you can do with just a 3" lift?
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 671
Likes: 0
From: Chuluota
Year: 2001
Model: Cherokee
Engine: 4.0
Just wondering what others have gotten into with a 3" lift off roading wise. Share any pics that you might have.
What about "what you can do on 3" or less"? Im only up 2" and flex at this point is more limited by the shocks being OEM length, so I can't get that last little bit out of it.. That changes next Monday as I can finally get the longer shocks installed.. They have been paper weights for like 3 months now... Lazy... But I digress.. Like I said, what about 3" or less??
Trending Topics
CF Veteran
Joined: Dec 2011
Posts: 4,006
Likes: 1
From: Pasadena, MD
Year: 1987
Model: Wagoneer
Engine: Renix 4.0
Seasoned Member
Joined: Aug 2011
Posts: 362
Likes: 0
From: Minnesota
Year: 2001
Model: Cherokee
Engine: 4.0
Thread Starter
Senior Member
Joined: Jul 2011
Posts: 671
Likes: 0
From: Chuluota
Year: 2001
Model: Cherokee
Engine: 4.0
Sorry I should have worded that different. I meant more what have you done with stock fenders and just a 3", haha. All though those are impressive pics!
those pics were 36" bias iroks, which measure larger than the 37" irok.
yup. i measured 2.5" when comparing a stock xj from axle tube to bottom of frame.

thats the lowest ive been iirc. i have run similar setups. 37's 36's and 35's on anywhere form 3" to 5" and currently 38's on an unknown amount of lift.(dont care to measure, all i know is it works)
yup. i measured 2.5" when comparing a stock xj from axle tube to bottom of frame.

thats the lowest ive been iirc. i have run similar setups. 37's 36's and 35's on anywhere form 3" to 5" and currently 38's on an unknown amount of lift.(dont care to measure, all i know is it works)
Thread
Thread Starter
Forum
Replies
Last Post
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Jan 27, 2020 09:24 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
Sep 7, 2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)








