I went to discount to get 32s put on the cherokee. They told me it was hitting the frame and could not install them for it wouldn't turn left. I have a 3.5" lift. What can I do? Do I need to space or backspace. Wheels are 15x8..

 

If you can, go with backspacing over spacers.

edit: also make sure your axle is centered under the vehicle.

 

Do you Have a site with good backspacers?

 

Backspacing is an aspect of the rims. Stock rims have 4.5" of backspacing. This the measurement from backside of the rim to mounting surface. More backspacing, the more the wheels are tucked into the body; less backspacing, the farther the tires stick out.

 

Bought the cragar soft 8s with the 32s. Hope it works

 

That doesnt help, do you know what backspacing the rims have? You can find out with 2 rulers.

 

I don't. I have the razors from discount. 15x8. He told me to do the steelies with a -13b because the others have a -6b ..

 

How wide are the 32s? Should be ok with aftermarket rims though.

 

11.5.

 

More than likely your wheels are 4" backspace so it should be OK.

 

How much taller are the 32's to the 31's?

 

Uhm......1"

 

That's what I thought. But wanted to make sure

 

Also divide that in half with how much taller your jeep will sit than before with just tire change since half tire below axle and other half above it

 

I have a 3" lift now with 31 s thinking about going 32's