I can't wait for the UPS/FedEx/delivery guy to get here today because...
CF Veteran
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Build thread for onboard air from a/c compressor
https://www.cherokeeforum.com/f67/c-compressor-onboard-air-how-176742/
https://www.cherokeeforum.com/f67/c-compressor-onboard-air-how-176742/
CF Veteran
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Now waiting for a Durango steering box, WJ steering pump and new PS lines to come in the mail.
Got some DW and found that my box was leaking so I figured I'd replace it all after I get an alignment this weekend
Got some DW and found that my box was leaking so I figured I'd replace it all after I get an alignment this weekend
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
putco harness and hella 55/100 bulbs should be in TODAY.. the autopal glass ecodes are.. uhh.. across the country... ? lol
I now have hatch struts in and looking to see what other junk I can order.
I now have hatch struts in and looking to see what other junk I can order.
Senior Member
Joined: May 2013
Posts: 688
Likes: 33
From: Maryland
Year: 1997
Model: Cherokee
Engine: 4.0
Waiting for this week:
IRO double shear track bar
RR CAD and 1" Poly spacer
Performance Curve spun cat
Ubolts, clamps, center pin for bastard pack (picked up springs this past weekend)
Brake shoes, trans and motor mounts
front and rear BPE
Zone 4.5" end links
Driving me nuts with aniticipation.
Arrived yesterday 4 control arms and 2x o2 sensors.
Going to be a fun weekend if it all shows up!
IRO double shear track bar
RR CAD and 1" Poly spacer
Performance Curve spun cat
Ubolts, clamps, center pin for bastard pack (picked up springs this past weekend)
Brake shoes, trans and motor mounts
front and rear BPE
Zone 4.5" end links
Driving me nuts with aniticipation.
Arrived yesterday 4 control arms and 2x o2 sensors.
Going to be a fun weekend if it all shows up!
CF Veteran
Joined: Oct 2011
Posts: 4,440
Likes: 3
From: Seal Beach, CA
Year: 1996
Model: Cherokee
Engine: 4.0 HO Straight Six
Waiting for this week:
IRO double shear track bar
RR CAD and 1" Poly spacer
Performance Curve spun cat
Ubolts, clamps, center pin for bastard pack (picked up springs this past weekend)
Brake shoes, trans and motor mounts
front and rear BPE
Zone 4.5" end links
Driving me nuts with aniticipation.
Arrived yesterday 4 control arms and 2x o2 sensors.
Going to be a fun weekend if it all shows up!
IRO double shear track bar
RR CAD and 1" Poly spacer
Performance Curve spun cat
Ubolts, clamps, center pin for bastard pack (picked up springs this past weekend)
Brake shoes, trans and motor mounts
front and rear BPE
Zone 4.5" end links
Driving me nuts with aniticipation.
Arrived yesterday 4 control arms and 2x o2 sensors.
Going to be a fun weekend if it all shows up!
I got the tire carrier part to my bumper yesterday.
Power steering hoses are coming today.
Power steering pump comes tomorrow.
Hood vents come Thursday.
Steering box comes Friday.
Something every day this week, I'm happy
well I'm not overly impressed with the putco. I didn't install it yet since I immediately found a broken crimp upon inspection. I plan to depin and check everything and run some solder over everything. Overall it's well worth the price but I can see how people have had issues with them.
I installed my hatch struts (cheap ebay ones less than $30 shipped for both) They work perfect. (who knows for how long) but my old ones were blown.. I took them off and they wouldn't even slide back out.
anywaaayys today my autopal ecodes should be in.
I installed my hatch struts (cheap ebay ones less than $30 shipped for both) They work perfect. (who knows for how long) but my old ones were blown.. I took them off and they wouldn't even slide back out.
anywaaayys today my autopal ecodes should be in.
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
My putco harness was good. I got it awhile ago, maybe quality has declined.
I am now really torn.
I don't know if I should buy my long arms, a tube bender, or....
Something just offered to me for $1300...a Dodge Stealth RT (twin turbo awd).
The Stealth needs turbos rebuilt, but would be worth a hell of a lot if done. Easy money to be made.
:worried:
I am now really torn.
I don't know if I should buy my long arms, a tube bender, or....
Something just offered to me for $1300...a Dodge Stealth RT (twin turbo awd).
The Stealth needs turbos rebuilt, but would be worth a hell of a lot if done. Easy money to be made.
:worried:
Thread Starter
CF Veteran
Joined: Sep 2010
Posts: 21,168
Likes: 5
From: Milwaukee, WI
Year: 1987
Engine: Check
Buy the stealth for $1300, rebuild the turbos, beat the hell out of it til I sell it, make double my money.
I like flipping cars for extra money. Haven't done it much, mostly with my old room mate, but its fun.


