Any body have any good mounting ideas for a high lift jack on a emt conduit rack. Couldnt find any thing

 

Cheap and easy: pipe clamps to hold it up and thread a longer bolt through the one end so it doesn't slide out. There are more eloquent ways of doing it though.

 

I want it not to be stolen either

 

Easy enough. Have a bracket that runs parallel to the handle, drill a hole, and put a lock through that and any of the holes that are in the high lift. You could use that in place of a bolt.

 

weld some half inch bolts to wherever you want it mounted, slide the high lift body over the "studs" washer and nut on top.

Not theft proof, but theft deterring, thieves need to be carrying around a 3/4" wrench to steal it. and its the same size as your lug nuts, so your stock lug wrench or a 4 way would get it off no sweat.

 

I used u bolts on my surco rack and secured it with a foot long chain and lock for security.