Herculiner Kit?
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Kenosha, Wi
Posts: 551
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L I-6
Herculiner Kit?
I found a Herculiner Kit at Farm & Fleet for like $80. Is this what people are typically using for the rockers? I was going to do undercoating because my buddy runs a body shop, but i've heard great things about the herculiner kits. So i think im going that route instead. Any feedback would be great too!
Thanks!
Thanks!
#2
Member
Join Date: Oct 2009
Location: College Station, Texas
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L
Yea i used it for my jeep. Check out my album if you want an example.
Make sure you prep well, sand it down with either 80 grit sand paper or a wire brush attachment for a drill. I used a drill and it went fast. You'll also need to buy some XYLENOL for cleaning the surface. I applied two coats and only used 2 quarts for what i needed.
Make sure you prep well, sand it down with either 80 grit sand paper or a wire brush attachment for a drill. I used a drill and it went fast. You'll also need to buy some XYLENOL for cleaning the surface. I applied two coats and only used 2 quarts for what i needed.
#5
Seasoned Member
Join Date: Oct 2009
Location: Gaithersburg, MD
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: Inline 6
awsome stuff.
i used two quarts to my whole floor. i sanded it down with 80 grit paper and wiped her clean. really happy with the out come. its been a year now and still looks nice like the first day i put it on. EXCEPT for my driver side near the pedal area. that's starting to chip a little. but expected since my boots rub against that area allot. really awsome stuff i would reccomend it to anyone.
#6
Member
Join Date: Oct 2009
Location: College Station, Texas
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0L
i used two quarts to my whole floor. i sanded it down with 80 grit paper and wiped her clean. really happy with the out come. its been a year now and still looks nice like the first day i put it on. EXCEPT for my driver side near the pedal area. that's starting to chip a little. but expected since my boots rub against that area allot. really awsome stuff i would reccomend it to anyone.
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
02-15-2024 08:09 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)