not when they get your wheelin places closed, we have a huge problem with them here.

i need to quit reading this thread... your making me want tube doors and i got a shipment of 1.5 inch od tube from the steel yard today i think 80ft will do it right? if i log off it means i went in the garage to make a set lol

 

Put some pics up when your done!!!!!!!!!!

 

haha okay, well what is the od that they are normally made out of? 1.5 right?

 

i think so not to sure bro

 

well i have some 1.5 inch tube layin out there so thats what theyre gonna be made out of lol, hopefully i can get them done between work this week,

what do you guys with power windows and mirrors do when you pull the doors off? i want to be able to put them back on still and have everything work, im guessing just put some type of connector on to re connect the wires?

 

Plugs for the front are behind the triangular piece of trim on each side. I think 3 on driverside and 4 on passenger. Then the rears are behind the seatbelt trim thing, but they arent very long so on mine i just extended the wires leading to the plug (about 4-6 on each side) so that you can just open up the gromet between the door and jam and reach in there to get the plug. Also unplug all for door button thing so your lights will stay off since it will think that the doors are open.

 

i just switched my doors to crank windows so i can just pull them off

 

chiming on this thread! hahah i have a 2 door and run doorless on the trail only and some nice days on the street. But with audio equipment i dont like running around town doorless.... But i have a cross over box for my door speakers so i have 4 speaker wires per door(manual windows/locks) so i used a trailer plug for my speaker wires and it works great!!!




I do love runnning around town with no doors tho! there is just nothing like it

 

how hard is it to take off the dorrs when u have power lockes and windows?

 

take the kick pannel off and un hook the connector !

 

but how would i disconnect the wires from the xj?

 

the power windown/door wires connect to the jeep main harness via a quick connector. IT is located in the kick panel, once that is disconnected then you need to take the rubber boot off and it will slide out with the door

 

oh ok,thanx for the help

 

yea, i just leave the kick panel's off , its not that big of a deal taking the wires out

 

i built a set of half doors, that way no mirror problem and you dont get the look of the ugly body without the trim of the doors



more pictures up soon