when i bought my xj i took off the stock fogs cause they were cracked and didnt work. but now im acking for some but dont know what kind to get. I dont have alot of money to spend on them cause im broke from the wheels and tires i just bought so what is the best fog/spot light i can get for the least price? I DONT plan on using them with the normal lights they have already been wired into a switch on the console.

 

check northern tool's website for lights they've got some good stuff and its cheap too

 

heres the link for the lights i foung from northern http://www.northerntool.com/webapp/w...+768693+771389

 

55w baja lights from walmart. 20 bucks for 2 and they acctually do a pretty good job

 

+2 when you break them they are cheap to replace. note I said when not IF. it will happen it's just a matter of how long.

 

yep broke one a couple months after buying them....however it may have been my fault or the lights just dont like barb wire

 

im looking to bye once and keep forever lol
but im willing to spend a little under a hundred if i have to if i can get better quality

 

depends then. i never would have broke those normally but i like to push things to the limit if you arnt that hard on things then a pair of 20 or 30 dollar 55 watt ones from somewhere like orielys or walmart could last you

 

go with the Hella round lights you can get them at Kragens for like $70 bucks,or just get the Baja lights at Walmart.

 

I have a set of kc 57 series lights that came with my last xj. I just bought all new hardware for them. Kc offers lexan lens that are unbreakable and warranteed for 23 years. The set is about $130 and comes with fog lens(amber), fog lens(clear), and driving lens(clear). I just swapped the lens to flood(glass/clear) and love em.

here's the series http://www.kchilites.com/store/Driving-C56.aspx

 

My XJ had a set of the factory foglights but were gone when I got it. I have seen the Baja lights at Walmart and thought about getting a set just because they are so cheap. I wanted to know if I could splice into the existing wiring for the old lights or do I need a heavier gauge wire than the jeep came with? My other question is will these mount in the original location on the bumper without drilling any new holes? Thanks for the help.

 

yea you can splice into the wiring just fine and yep the holes on mine were perfect