CR-Snow

My ever expanding pile of parts is nearly complete. Pretty excited to dive into this work as soon as the holidays are over. January is get to know the front end of my jeep month.

4 Bilstein 5100's
JKS front and rear bar pin eliminators
New poly bushings for the shocks
Alloy USA chromoly ball joints
Spicer u joints
Timken hubs
ZJ steering upgrade from the pitman arm down
And some under hood LED's

Will probably get some JKS disco's before the work begins too. So pumped.

XJwonders

U ll have fun. Penetrating oil will be your best friend

CR-Snow

I'm about to buy a case of PB blaster lol.

XJwonders

look into aerokroil. 10x better than PB blaster

CR-Snow

Can you find that stuff at regular parts stores?

XJwonders

not really. U can look for stores that carry it (dealers) or order online

Fred/N0AZZ

Yes good stuff and start well ahead of time applying it and turning the bolt/nut a little both ways, apply again.


Your going to enjoy a better ride with the new shocks.

CR-Snow

Man that aerokroil is expensive! I haven't really been super impressed with PB blaster so I'll give it a try.

I'm so ready for these shocks. 30,000 miles on white tube shocks just isn't cutting it anymore.