75 cherokee dana 44 swap into 88?
CF Veteran
Joined: Jun 2011
Posts: 8,014
Likes: 17
From: Louisville,KY
Model: Cherokee
You will have to cut the spring perches off and weld on the control arm tabs and all that you need.If you got it cheap i would use it even with the lug pattern different.I wonder if this would work on it http://www.tntcustoms.com/fronttruss-wagoneerd4480.aspx
Last edited by andrewmp6; Sep 13, 2011 at 06:25 AM.
CF Veteran
Joined: Feb 2010
Posts: 5,420
Likes: 0
From: Soddy Daisy TN
Year: 97
Model: Cherokee
Engine: 4.0L
Front or rear? Rear would work but front is a passenger side drop. It will also have high gears, numerically low like 2.73, and would need to be swapped too.
CF Veteran
Joined: Feb 2010
Posts: 5,420
Likes: 0
From: Soddy Daisy TN
Year: 97
Model: Cherokee
Engine: 4.0L
Also I don't have my books with me at the moment but some early versions have an offset rear so the drive shaft would be at an odd angle and wear out u-joints really fast.
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 90
Likes: 2
From: Southern cali
Year: 88
Model: Cherokee
Engine: 4.0
Originally Posted by andrewmp6
You will have to cut the spring perches off and weld on the control arm tabs and all that you need.If you got it cheap i would use it even with the lug pattern different.I wonder if this would work on it http://www.tntcustoms.com/fronttruss-wagoneerd4480.aspx
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
clangstaff
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
May 30, 2019 10:34 AM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 23, 2015 12:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)