6 month build plans?
#1
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Benton, KY
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
6 month build plans?
any of you have any plans for your project for the next 6 months?
mine are just rough ideas at this point since i wont have my xj for at least 2 more weeks, but they will go somewhat in this order.
-full tuneup with all fluids changed and new belts
-gut interior
-3" lift, homemade spacers in the front and s10 bastard pack in the back
-cut fenders
-33's (going to run the junk ones i have until they are bald, then buy some, not sure what kind)
-8.8 rearend with welded spiders
-non disco shafts (or whole non diso front end if i can find one)
-front lockrite
-tube doors
somewhere in there it's going to get a rusty's style longarm kit and i may swap in the 63" chevy springs i have instead of the bastard pack if i can do it with 3" of lift and not have to have my shackles stick out past the bumper
mine are just rough ideas at this point since i wont have my xj for at least 2 more weeks, but they will go somewhat in this order.
-full tuneup with all fluids changed and new belts
-gut interior
-3" lift, homemade spacers in the front and s10 bastard pack in the back
-cut fenders
-33's (going to run the junk ones i have until they are bald, then buy some, not sure what kind)
-8.8 rearend with welded spiders
-non disco shafts (or whole non diso front end if i can find one)
-front lockrite
-tube doors
somewhere in there it's going to get a rusty's style longarm kit and i may swap in the 63" chevy springs i have instead of the bastard pack if i can do it with 3" of lift and not have to have my shackles stick out past the bumper
#2
Senior Member
Join Date: Dec 2009
Location: Fort Lauderdale
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1993
Model: Cherokee
Engine: 4.0
sounds like it's gonna be a sweet set up cant wait to see pics.
here is my 6 month list:
4.5" RC short arm w/ full packs (at my house already)
OR-FAB winch front bumper and matching rear
Mickey Thompson Side Biter wheels
ARB snorkel
33's or maybe cut the fenders and get 35's
and some other stuff too....
here is my 6 month list:
4.5" RC short arm w/ full packs (at my house already)
OR-FAB winch front bumper and matching rear
Mickey Thompson Side Biter wheels
ARB snorkel
33's or maybe cut the fenders and get 35's
and some other stuff too....
#3
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Benton, KY
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
o, i forgot the 2x6 rocker replacement.
i'm still trying to decide if i just want to take the doors/hatch off and windows/windshield out and make it like an overgrown Rhino, or leave them and keep heat/defrost...brother in law (who was wanting an atv at the time, now he's wanting a jeep or toyota) argued with me one day and said it would be stupid to not have heat but i made him feel stupid when i asked him what the difference in that and an atv would be...i just cant decide. on one hand, it would be nice to sell the perfectly straight doors to get some of my money back to put into it, but on the other hand it would be nice to have heat out on the trail, especially since i have a son who will be one in a few weeks and i want to get him into offroading early so hopefully he grows up enjoying it, not being a video game addict like most kids these days.
i'm still trying to decide if i just want to take the doors/hatch off and windows/windshield out and make it like an overgrown Rhino, or leave them and keep heat/defrost...brother in law (who was wanting an atv at the time, now he's wanting a jeep or toyota) argued with me one day and said it would be stupid to not have heat but i made him feel stupid when i asked him what the difference in that and an atv would be...i just cant decide. on one hand, it would be nice to sell the perfectly straight doors to get some of my money back to put into it, but on the other hand it would be nice to have heat out on the trail, especially since i have a son who will be one in a few weeks and i want to get him into offroading early so hopefully he grows up enjoying it, not being a video game addict like most kids these days.
#4
CF Veteran
Join Date: Mar 2008
Location: Salem Virginia
Posts: 2,649
Likes: 0
Received 3 Likes
on
2 Posts
Year: 1998
Model: Grand Cherokee (ZJ)
Engine: 4.0
4.5 inch lift to install
H-N-T SYE
HP Dana 30 for the frontw/4.56 gears
Ford 8.8 for the rear w/4.56 gears
33 inch tires
Diff skids
lower control arm skids front and rear
Buy wife a ZJ and lift it.
H-N-T SYE
HP Dana 30 for the frontw/4.56 gears
Ford 8.8 for the rear w/4.56 gears
33 inch tires
Diff skids
lower control arm skids front and rear
Buy wife a ZJ and lift it.
Last edited by drakan1908; 02-05-2010 at 08:21 AM.
#6
CF Veteran
Picking up my D60's
Tires and wheels
Start cutting and welding up the stiffeners/rockers and suspension
get it up to a roller.
Tires and wheels
Start cutting and welding up the stiffeners/rockers and suspension
get it up to a roller.
#7
CF Veteran
New Tyres (probably General Grabber AT2) 235/75/15
New Antenna
Investigate/Regas the aircon
New front U Joints
New rear spring shackles
Probably a new catalyst
Yep, very tame stuff but hey - it'll make you guys look good
New Antenna
Investigate/Regas the aircon
New front U Joints
New rear spring shackles
Probably a new catalyst
Yep, very tame stuff but hey - it'll make you guys look good
Trending Topics
#8
Senior Member
Join Date: Oct 2009
Location: NW Florida
Posts: 537
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Grand Cherokee
Engine: 4.0
My plans are pretty mild, but I'm excited none the less. Already buying parts, just setting them aside for now since I teach school, so I've got to wait for summer...
Install the Taurus e-fan I just bought.
Install the 99+ intake I just bought, along with a TBS and bored TB.
Exhaust header, probably this one.
Install Neon fuel injectors.
Install front tow hooks that I got for Christmas.
Bedliner+sound deadening under carpet that I got for Christmas.
New Headliner.
Have A/C recharged.
Window tint.
Install the Taurus e-fan I just bought.
Install the 99+ intake I just bought, along with a TBS and bored TB.
Exhaust header, probably this one.
Install Neon fuel injectors.
Install front tow hooks that I got for Christmas.
Bedliner+sound deadening under carpet that I got for Christmas.
New Headliner.
Have A/C recharged.
Window tint.
Last edited by 4Doors; 02-04-2010 at 04:04 PM. Reason: +headliner
#9
Senior Member
Join Date: Oct 2009
Location: Spring Lake, Michigan
Posts: 652
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Well I had some pretty nice plans for my Jeep but I went outside earlier today to get the mail, and well I see my gas leak has gotten worse. So now I need a New gas tank, a new Transfercase, and we will see what else it needs as time goes on...
#11
CF Veteran
Join Date: Oct 2009
Location: Parrish
Posts: 1,487
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Comanche
Engine: 4.0
Not set in stone BUT assuming I can get a job...
2-3 inch lift- bastard pack rear, ZJ V8 springs front.
New shocks
fix rear cargo area floor and probably do something robust with it
paint rims
fix mirrors
new tires after lift 29-30 A/T
its a DD so maybe some 6x9s in the rear
2-3 inch lift- bastard pack rear, ZJ V8 springs front.
New shocks
fix rear cargo area floor and probably do something robust with it
paint rims
fix mirrors
new tires after lift 29-30 A/T
its a DD so maybe some 6x9s in the rear
#13
Member
Join Date: Nov 2009
Location: Dover PA
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0L Power Tech I-6
Install 4.5" LA RC lift kit, SYE , rear CV driveshaft, front JCR stage 4 bumper, & rear JCR stage 3 bumper w/tire swing this month all parts ordered bumpers here. Before spring replace dented down pipe with 2 1/2" exhaust pipe front to back with magnaflow cat & flowmaster 44 exhaust. Installed shorty header Rugged Ridge last month.
#14
Seasoned Member
Thread Starter
Join Date: Jul 2009
Location: Benton, KY
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1986
Model: Cherokee
Engine: 2.8
have a buddy coming over today to pull my little brother in law's yota out of the woods with his XJ. he hauls it on a trailer since it's just a playtoy with no ins/reg, so hopefully i can talk him into going and picking up my XJ for me since his trailer will already be hooked up.
#15
Senior Member
Join Date: Jan 2010
Location: Brentwood, TN
Posts: 999
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
New Rotors and brake pads tomorrow.
2" lift with new tires(nothing serious, I got young kids still)
what ever engine repairs pop up.
My list is short. I dont want to blow a ton of cash on mine until I am comfortable with the engine. I expect things to go wrong and the last thing I want to do is wish I hadnt spent all that money on a lift, tires, etc. and need a cooling systme replaced or head replaced.
2" lift with new tires(nothing serious, I got young kids still)
what ever engine repairs pop up.
My list is short. I dont want to blow a ton of cash on mine until I am comfortable with the engine. I expect things to go wrong and the last thing I want to do is wish I hadnt spent all that money on a lift, tires, etc. and need a cooling systme replaced or head replaced.