fab-ullys.zj.

can it be done ?,,,,,,can the unibody servive cutting the floor, then raising the tank 3 to 6 inches, then fab and weld the floor back ???????

rickybarth

y not just put a skid plate on it

THENNING

yea ive seen guys on pirate do it to their zjs

PolarXJ

Yeah it can be done. If your not worried about a lose in your cargo area, why not just move it completely up?

XJSETH

^^^this

fab-ullys.zj.

thanks for your thoughts , my objective would be to gain ground clearance ...

fab-ullys.zj.

thanks for your thoughts, im thinking both options through...hmm ?

biggoofy

are you refering to a WJ? There is not much room in a ZJ due to the tire being mounted on the drivers side by the window. The WJ has the tire under the floor and the tank lift is a very common mod and you will not have any issues.

on the ZJ if thats what you have unless you have a cage and stiffeners I personally wouldnt do it

retreaded jeeper

polar said it..fuel cell in cargo

lonestar_yj

I have a zj and just put the factory tank behind the back seat.

Gee oh Dee

I could be wrong on this, but doesn't that make things unsafe?

I didn't think the factory tank was meant to be in-cabin like real fuel cells are.

XJSETH

you bring up a good point but some buggyed out rigs have stock tanks. either way they make some cells out of the same plastic stock tanks are made out of

Gee oh Dee

I spose it could be done safely if done right, but on the other hand it could cause some good problems if not thought out and done incorrectly.

It always gets me concerned when adapting something that could be dangerous when something is actually designed and made for the same purpose.

lonestar_yj

Mine is strapped down to the floor. No leaks, no gas smell and has been back there for 6-7 years.

retreaded jeeper

Gee is absolutely right,is the tank now shielded& vented/with drain for any spillage. Also how big is your bumper?