I'm going to get to them tonight or tomorrow morning.

 

Here ya guys go



Then added gussets. Im not 100% finished yet, but will update.

 

look for the xtreme 4x4 episode where they put a lift kit on an orange LJ.. they drilled a small hole in the frame, took a nut welded to a washer, shoved it into the hole, and then welded the washer to the frame.

 

Awesome! Thanks man..

 

Hey: m having a hard finding that episode.But I'm pretty sure I got what you're saying. If you find it, let me know please.

 

Found it, my bad it was an episode of Trucks! Here it is, 6:15 into the video
http://www.powerblocktv.com/player/s..._num=TK2011-08

 

Thanks man!

 

I like that, how thick is the steel?
And that nut and washer idea is great

 

When the self tapper bolts fell out of my Rustys T Case skid, i drilled two hole's threw the frame rail where the existing ones were, got the 4 1/2" grand 8 bolts and ran them threw the frame rail with a lock washer and a nut on the other side. Has held up good ever since.

 

The steel is 3/16. And the issue I had with thru bolting, was crushing the box frame. Not a big deal, as all you would have to do is insert some tubing/steel pipe and weld them in place to withstand the clamping force. I thinkt he nut/washer idea is where its at.

 

Got any dimensions, sketches on napkins?

 

Wanna buy one?

 

Are compliments and smiley faces an accepted method of payment?

 

haha its a joke, ill have the measurements for you today

 

here are the plans. Click to get high res picture.