my newest bumpers.
#1
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
my newest bumpers.
i have built 6 bumpers in the past month. got to work on mine here and there(prob 8 hrs in both.)....and still not done.
front is a winch bumper. built with 1 3/4 HREW and 6x1/4 inch flat steel.
now before any of you start giving me crap about no stinger support bars, it will be tied into my cage from the a-pillars. there will also be tube fenders attatching from the rockers to the front and rear bumpers.
cage will look something like this....
and my rear tire carrier will look something like this.....
tire carrier mounts will come off the cage, not the bumper.
front is a winch bumper. built with 1 3/4 HREW and 6x1/4 inch flat steel.
now before any of you start giving me crap about no stinger support bars, it will be tied into my cage from the a-pillars. there will also be tube fenders attatching from the rockers to the front and rear bumpers.
cage will look something like this....
and my rear tire carrier will look something like this.....
tire carrier mounts will come off the cage, not the bumper.
#3
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
just got a fully outfitted shop started about 3 weeks ago (HUDFAB).......i now have all the fun tools to play with. cnc plasma table next on the list. not really advertising because i already have a 2 month backlog.
bumpers were made with a tube bender, tube notcher, welder, plasma cutter, 4.5 inch grinder, and my scary little brain.
its also very nice to have vehicle lifts to put em on while building. saves my bad back!! lots of 7am-1am days latley.
funny part is, i have only had xj's in the shop so far!!!
this is my side biz. im really just an electrician, but a fabricator at heart.
bumpers were made with a tube bender, tube notcher, welder, plasma cutter, 4.5 inch grinder, and my scary little brain.
its also very nice to have vehicle lifts to put em on while building. saves my bad back!! lots of 7am-1am days latley.
funny part is, i have only had xj's in the shop so far!!!
this is my side biz. im really just an electrician, but a fabricator at heart.
Last edited by MallCrawlXJ; 10-16-2011 at 10:16 AM.
#6
Senior Member
Join Date: Mar 2010
Location: Hampton, Virginia
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: none other
so your plans are a swing down tire carrier?
i like the plans and intended to watch this come along. i would love to have a shop like that as i too am a fabricator at heart with no proper tools either. looks good and keep it up.
i like the plans and intended to watch this come along. i would love to have a shop like that as i too am a fabricator at heart with no proper tools either. looks good and keep it up.
Trending Topics
#8
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
no, will be a swing out....just mounts off the cage.
i built a swing down on my last jeep and it was a huge pain! being a two door, i have to use the hatch a lot for my dogs.
#10
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
#11
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
#13
CF Veteran
Thread Starter
Join Date: Jan 2011
Location: Littleton, CO
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 2001 4.0L
so these bumper are for sale if anyone is interested. will be adding a fairlead mount and drilling for a winch on the front.
$500 for the pair? plus shipping.....pm if interested.
located in littleton/golden colorado
$500 for the pair? plus shipping.....pm if interested.
located in littleton/golden colorado
Last edited by MallCrawlXJ; 10-17-2011 at 06:52 AM.