Now u say you "had" this done. Did you pay somebody else to do this? Whoever did it must have been cross eyed because not one of those lights is lined up with another. Don't those lights drive you nuts at night? And would it kill you to grab a shop vac? That's pretty nasty dude

I am looking to convert my power Windows to manual Windows. Has any one done this? How hard is it

Made these cut n fold fuel filler tube armor. Made from 16ga sheet metal. WAY tougher than the stock rusted out piece that came off it.

Attachment 361838
Attachment 361839
Attachment 361840
Attachment 361841

And made a pair of cowl light mounts
Attachment 361842

Very nice! Thats a piece of upgraded armor I havent seen yet!

You think with the lights right there it will bug you or be in the view of the road too much? very nice job on both tho! really like the gas line protector alot.

Finished installing the bracket. This console ain't going no where unless of course the plastic on it breaks. Just a slight gap on the back, but it doesn't bother me.

This is air intake cowl I made. I will have to take pic and add it later of my cai system I made. I designed this cowl off of an egyptian military jeep I saw at Chrysler proving grounds. I love the sucking sound of the intake now. I will be bondoing it pretty then painting the jeep, at least after rust repair.Attachment 142048Attachment 142049

I think they're out of the way enough on the cowl no to interfere with my vision when driving. And yea that fuel filler armor was a no brainer once I did my cut n folds, that stock piece is just that................a piece

If you have some dimensions on this I would greatly appreciate it. The plastic ears on mine broke off too!

alright guess im going to have to put some lights there too. And I know that stock protector was juk just cut nfolded the rear the other day and was thinking of making a new one.. thanks for the ideas!

I'm interested in seeing more about this. I have too much stuff in my way to do Dukie's CAI with the ABS. This looks like it might work.....pondering.

I did this right after I bought mine a few years ago. I went the opposite direction you did. I hated those dummy lights so I cut some abs plastic and put my gauges in the console.

good job! nice and clean! i'm doing the same, but the capillary tube for my water temp is too short...have to buy another gauge.

I like it! I may be doing this now.

Just finished fabbing these up. step sliders with marker lights still wanting to add some sort of an led to light up when i open the door. theyre pretty tough though i tested the strength with my jack both wheels were off the ground and this thing stayed solid as a rock. comments? almost considering making some more and selling them.
Attachment 143948
Attachment 143949