Home brew tool box stand
I was originally building a wooden tool box that was going to take up all the space in the back. I started researching tool boxes on CF and found some that used up the space over the wheel well. So i started to design one that would suit the purposes and the tool box that I found in my work shop. I used 1 1/4"x1/16" square tube and angle iron to build this project. Im not done with this yet, but mostly it is welding together ar this point. I'm going to add some slides or track for the ammo cans to sit in one will hold ammo one will hold recovery gear and the other will be a first aid kit... there's a possibility of fitting two more on this frame in that case both would gold spare parts of some sort. If you have any ideas let me know or just some feed back.
https://cimg9.ibsrv.net/gimg/www.che...a5ca93d8ff.jpg https://cimg2.ibsrv.net/gimg/www.che...1f8203b3fe.jpg https://cimg6.ibsrv.net/gimg/www.che...aba3f0b4e6.jpg https://cimg7.ibsrv.net/gimg/www.che...9b2b95bfbb.jpg https://cimg0.ibsrv.net/gimg/www.che...696c2ae588.jpg https://cimg1.ibsrv.net/gimg/www.che...bfc7fba9b9.jpg https://cimg2.ibsrv.net/gimg/www.che...f5b79bed06.jpg https://cimg8.ibsrv.net/gimg/www.che...1cfeb91a69.jpg https://cimg3.ibsrv.net/gimg/www.che...a474baaf98.jpg https://cimg8.ibsrv.net/gimg/www.che...e721cd5f77.jpg https://cimg1.ibsrv.net/gimg/www.che...1d2ea90862.jpg |
That looks great. Really got me thinking into something like this
|
Why not spin it so the drawers slide to the back instead of into the side? If the rear is full of gear, you cant get the drawers open. Also, you might consider putting the tool box on the bottom and the ammo can on top, due to weight distribution. I like the concept!
|
I dig it
|
Thanks for the responses guys
Originally Posted by WyoCherokee
(Post 3227873)
Why not spin it so the drawers slide to the back instead of into the side? If the rear is full of gear, you cant get the drawers open. Also, you might consider putting the tool box on the bottom and the ammo can on top, due to weight distribution. I like the concept!
|
All times are GMT -5. The time now is 08:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands