i 2nd this, i got a 2dr and want to make some tube doors for it but am afraid that modding the hinge will weaken it.

 

so... i went 2 door. and just welded the hinge up good! and now my doors sit on the door sills better than ever!

 

i had that same problem with the torx bit haha...but i torched the bottom hinge and ground it down..all was left was the pin and all my doors just pull off..very easy to do rather then mess with those annoying bolts..just my advice

 

this allso works on 97's as well. mine was built 06-97 and i have these same hinges.

 

Some 97s have the 96 hinges if they were built early in or before 97. A little more than half way through, they changes up the hinges to what most 97 - 01s have.

 

If you gonna go doorless with 4 doors you gotta go all the way . . .

 

not to sound picky but some picks of the hinges themselves would be fun to see

 

lol when i get back into town (half way across the us from it now) i will take some pictures. but they look like every other 96and prior door hinges lol

 

im in the city and need to get doors back on-- it looks like they were taken off in the same manner you describe-- any help would be great thanks

 

putting them back on gets easier every time you do it... but i think we need a little bit more information to help you. maybe some pictures? what year is your jeep?

 

so a little info on my jeep its a 93 cherokee sport-- i got it with no doors, so i am also in the process of locating them at a pick a part. i dont really mind not having the doors but from what i read its not exactly legal to be doorless in this model of jeep. im located in texas and i believe there is a one mirror rule-- anyways this is my problem it looks all ripped up where the doors were i have a welder that can work on it also-- im just not so knowledgeable about much of any of this stuff so if you let me know ill pass it on -- thanks so much- hope the pics come out

 

you have some major work ahead of you. all the hinges are torn away from the body, and the upper driver side is totally gone.

 

ouch x2 on having major work ahead of you. when you get the doors from the junk yard see if they can cut off the whole hinge assembly from the unibody for you too

 

x2^^^^^^^

 

Thanks for making this thread. Ive been want to take my doors on and off whenever I want and didn't kno exactly how to do it. Now I'll be doing this soon as it warms up around here. And I'll be making half doors. So i can go from the full doors to half whenever I want.