front bumper winch mount
#1
Junior Member
Thread Starter
Join Date: Nov 2011
Location: the up eh!
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Year: 89' 92'
Model: Cherokee
Engine: 4.0
front bumper winch mount
well after ripping the bumper off because of insuficiant tow points i decided it was time to upgrade the front bumper to accept 2 shackles and the receiver winch.
didn't realy like the approch angle though
added a second receiver tube on top of the original one i put one and set it back about 2 inches
approach angle is better!
front view
the frame tie ins go a ways back on the frame almost to the track bar bracket on the drivers side. if i decide that i want it on something else i would be fairly screwed as it is fully welded to the "frame' and also includes 3 2 inch rossett (sp) welds. it shouldn't go anywheres! let me know what you think.
didn't realy like the approch angle though
added a second receiver tube on top of the original one i put one and set it back about 2 inches
approach angle is better!
front view
the frame tie ins go a ways back on the frame almost to the track bar bracket on the drivers side. if i decide that i want it on something else i would be fairly screwed as it is fully welded to the "frame' and also includes 3 2 inch rossett (sp) welds. it shouldn't go anywheres! let me know what you think.
Thread
Thread Starter
Forum
Replies
Last Post
96Co
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
01-10-2024 06:17 AM
Buzball
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-02-2015 05:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)